Do-it-yourself small bouquets of flowers from ribbons. DIY bouquets of satin ribbons. Rose buds from ribbons

Floral decorations made from satin ribbons are very unusual and beautiful. Made with your own hands - they are the best gift both for children and adults.

Making flowers from satin ribbons with your own hands is a painstaking but exciting task.

The main tools for making jewelry are:

With proper use of available materials, the flowers come out strong and of good quality. They can be attached to elastic bands, hairpins, headbands, or arranged into bouquets.

Types of petals

Satin ribbon flowers are collected from petals different shapes. The main ones are sharp and round. Any type of petal can be made with your own hands. The sharp shapes of the petals are suitable for making flowers such as aster, chamomile, dandelion, sunflower, bluebell and others.

The varieties of sharp petals are:

Round-shaped petals are used to create flowers such as roses, lilacs, ranunculus, peony and others.

The varieties of round petals are as follows:

• two-color round (double);
• round for rose;
• round inverted;
• round flat;
• round narrow;
• round with a heart.

Master class for beginners: a simple flower in 5 minutes

A satin ribbon can turn into a flower in just 5 minutes. From this you can calculate that, for example, a hairpin with your own hands will be done within 7-10 minutes. It is necessary to strictly follow the instructions.

Step 2. Preparing petals. To do this you will need:

• fold a square of satin ribbon diagonally, marking the sharp ends with the numbers 1 and 2;
• combine ends 1 and 2. In the resulting triangle, mark the new acute angles with numbers 3 and 4;
• fold ends 3 and 4, resulting in a sharp petal;
• cut off excess material (cut a right angle parallel to the folded side and an acute angle parallel to the fold);
• solder the cut edges with a candle or lighter, fixing the petal with tweezers for convenience.

Step 3. Flower formation. The bases of the petals need to be connected with a thread like beads, tightened and decorated with a flower. Then you should glue the petals together for a more reliable fixation.

Step 4. Decoration. The middle of the flower must be decorated with a bead or button (optional). It is possible to add rhinestones or small stones to the center of the petals.

Flower made of satin ribbons 2.5 cm - step by step instructions

A 2.5 cm wide satin ribbon is perfect for creating lush flowers with your own hands. When finished, they resemble a bush rose. The technique is simple.

Step 1. Preparation of necessary materials:

• pieces of tape 2.5 cm wide and 7 cm long;
• needle and thread;
• fire;
• scissors.

Step 2. Preparation of petals . You need to melt the cut edges of the tape, bend the tape on each side so that you get a trapezoid, and additionally melt it to secure it. Then you need to do the same with all the tapes.

Step 3. Flower formation. It is necessary to sweep each petal blank along the bottom edge, pull the thread and fasten it, then sew the bases of the petals so that you get a flower.

To add volume, you can attach 3 more petals on top or leave the flower in a single layer.

Step 4. Decoration. Beads glued in the center, imitating the core of a flower, will look harmonious.

For the rim

Any flowers are suitable for decorating the headband, such as large and lush roses, peonies, chrysanthemums, zinnias, as well as small roses, jasmine, and bells.

To make a headband with a jasmine branch, you will need:

• a headband wrapped in a satin ribbon the color of the first green;
• a strip of rounded felt 2x16 cm of the same color;
• yellow plastic stamens - 1 bunch;
• pieces of white satin ribbon 5×5 – 25 pcs.;
• pieces of green satin ribbon 2.5x3 cm - 25-30 pcs.;
• thread, needle, scissors, glue.

Jasmine flowers form very simply. It is necessary to sweep a diamond shape on a white piece with white thread, then tighten the thread, insert a plastic stamen inside and sew it up. It takes 3 to 5 minutes to make 1 jasmine flower.

Important! When basting, the thread should not be interrupted, otherwise it will be impossible to form a flower.

To make a sheet from a green piece of satin ribbon, you need to fold it in half and round it off on one side with scissors. Then you should melt the edges and, while they are soft, slightly deform them in the manner of a jasmine leaf, gather the lower edges and melt them.

The finished elements are glued evenly onto a strip of felt to create a jasmine branch. You need to let it set and glue the finished composition directly to the rim.

For hairpins

To decorate hairpins, small flowers of light weight are often chosen, otherwise the hairpin will not hold the hair well and will slip off. Ideal options are small roses, one small chamomile, and aster. Very fast and beautiful flower is obtained from only 3 petals. A satin ribbon 5 cm wide is cut into 5 cm pieces. You need to make circles from the resulting squares.

You need to fold them in half and sweep them in an arc, tighten them, forming a petal with your fingers. Then you need to sew 3 petals together and glue a bead in the center. The resulting flower is glued to the hairpin. Note. If the flower is not large enough, you can increase the number of petals to 5-7. However, it is necessary to select a larger core size.

Ribbon roses

There are at least 5 techniques for making roses from satin ribbons.

For beginners, the following option is suitable:

Kanzashi chamomile

To make chamomile you will need:

First you need to prepare the petals. To do this, the atlas square is folded diagonally, then the sharp corners are folded towards the center. The resulting petal is folded in half. The tip is cut off and scorched with fire. Then fix it with tweezers on the other side and cut off the base parallel to the fold. They are scorched with fire so that the ends are soldered together. 15 such petals are prepared.

Carefully glue the petals at the base, forming a daisy. Glue a yellow button or a circle of yellow felt in the center. Kanzashi chamomile can be used to decorate a hairpin, a child’s handbag or a headband.

Lush flower made of satin ribbon

A lush flower is formed from round petals singed along the entire perimeter. They are carefully glued layer by layer to the base. There should be at least 10-12 petals. They can be either the same color or different.

The set of tools is similar:

• satin squares with a side of at least 5 cm;
• scissors;
• fire;
• stamens – 3-5 pcs.;
• glue gun

Aster

To make an aster you will need the following supplies:

• pieces of satin ribbon 2.5×5 cm;
• tweezers;
• scissors,
• fire;
• glue gun;
• several circles of felt.

For a flower average size 30-40 petals are needed. It all depends on the desired number of layers and the diameter of the aster. The petal is made in two stages.

• Stage 1. A strip of satin is folded in half lengthwise and clamped with tweezers. The edge is cut at an acute angle and sealed with fire.
• Stage 2. From the opposite edge, the strip is folded like an envelope, clamped with tweezers and fixed with fire.

Petals are glued onto the felt circle along the very edge. The next layer is glued closer to the center. The petals are placed visually between the petals of the first layer. The same is done with all layers. The number of petals in each subsequent level decreases. The finished flower is decorated with a bead core. You can also combine the colors of the petals.

Bell

When making a bell, the following materials are needed:

Bell petals are ordinary sharp petals, with the seam turned inward. One stamen is glued to each petal at the base. Then you need to glue their sides together, forming the flower itself.

The leaves of the bell are made in the same way as the petals, only the ribbon must be smaller in width. They must be fixed glue gun under the flower so that it peeks out slightly.

Hibiscus

To make hibiscus you will need:

You need to cut teardrop-shaped petals from the squares. Before assembling the flower, you need to corrugate them. To do this, the petal is folded like an accordion into 4 rows, then twisted into a rope and carried over the fire for several seconds. The cooled petal is unrolled.

A wire is glued to half of the petal on the wrong side. There should be at least 7 such petals. It all depends on the desired volume of hibiscus. Several stamens are twisted together and a bud of petals is formed around them. Then the petals are slightly leveled and arched.

Narcissus

To make one daffodil you need:

• scissors;
• fire;
• tweezers;
• glue;
• 5 squares of white satin ribbon 5x5 cm;
• 3 yellow squares 4x4 cm.

The petal is made like this:

1. A square of white satin is folded diagonally twice. Sharp corners must be folded like an accordion into 1 row on each side, then clamped with tweezers, cut off the excess and soldered with fire. You should get a petal with two folds inside.
2. The upper edge of the petal is clamped in the middle with tweezers and melted with fire. It has a slightly pointed shape.

The stamen is made in a similar way, only the upper edge is not pointed.

Assembling a flower involves sequential gluing of all elements. The resulting daffodil is practically indistinguishable from the real thing.

Poinsettia

Even beginners can make a poinsettia flower from satin ribbons with their own hands.

Necessary materials such:

• pieces of tape 5 cm wide and of different lengths;
• scissors;
• fire;
• glue;
• large stamens;
• wire.

The petals need to be cut out. To do this, pieces of tape are folded diagonally and cut out to form a petal. On top of the edges, 2 cuts are made on each side. The blanks are melted over a fire and the edges are slightly deformed. In total, you need 3 petals 5 cm long, 5 petals 6 cm long and 5 petals 7 cm long. Leaves are made in the same way - from pieces of 5x7 cm.

Assembling a flower begins with sequentially gluing together petals of equal length. The first layer of small petals is glued to the stamen, then the next layer is of larger petals, and the largest ones are glued last. The petals must be arranged in a checkerboard pattern.

You need to glue a wire onto the leaves with reverse side. They are attached to the flower by wrapping the stamen with wire.

Dandelion Kanzashi

To make a dandelion you need:

The technique is as follows:

1. The tape must be cut into strips 7 cm long. Fold each in half and solder the ends. These will be dandelion petals. Green ones need at least 25 pcs., yellow ones at least 27 pcs.
2. Green petals are glued around the perimeter of the felt circle using a glue gun. The second layer is also glued in a checkerboard pattern from green petals.
3. All subsequent layers are glued with yellow petals. This way you get a voluminous chamomile, which is perfect for decorating headbands and hairpins.

Sunflower

Any type of sharp petal, such as an aster's, is suitable for making a sunflower. A two-layer flower will require at least 26 petals. The petals are glued to a felt circle with a diameter of 5 cm along the very edge. A little closer to the center you need to glue the second layer in a checkerboard pattern.

The middle can be made of a circle of even felt or dermantine with a diameter of 4–4.5 cm. Beads or large black beads are glued onto it. The middle is glued to the flower, and the sunflower can be considered ready. If desired, you can add decor in the form of a butterfly or bug.

Lilac

To make a lilac branch you need:

The tape must be cut into strips 1.5 cm long. At least 60 pieces will be required. Flowers are made from them in the same way as jasmine flowers. Just before tightening the thread, you need to stick a wire with a bead strung on it into the center of a piece of ribbon. The result is a lilac flower on a stalk.

When all the flowers are ready, you need to form mini-branches of 3 each from them. and secure with one of the wire legs. A lilac branch is formed from these twigs and wrapped with floral tape.

Ranunculus

To make a ranunculus you will need a standard kit:

To make the petals, you need pieces of satin:

• 2×2 cm – 18 pcs.;
• 2.5×2.5 cm – 18 pcs.;
• 3×3 cm – 14 pcs.;
• 3.5×3.5 cm – 24 pcs.

They need to be cut out round petals like a peony, trim the base, melt over the fire, fold the base like an accordion, clamp with tweezers and secure with fire. The core of the ranunculus is made from a 5x5 cm piece of satin, into which a wad of cotton wool is sewn. It turns out to be a ball on which the petals will be attached.

Assembling the flower must begin with the smallest petals, pasting them over the stamen ball. Thus, you get a very beautiful flower that will suit any decoration as a decoration.

Wedding bouquet of ribbons

Over the past few years, wedding bouquets made from satin ribbons have become very popular. It's unusual and beautiful. Such a bouquet will please the eye for a long time, because it will not wither.

Handmade flowers made from satin ribbons for a wedding bouquet will become a unique symbol of family happiness.

By combining various flowers from satin ribbons, you can create decorations for hairpins or headbands, as well as themed bouquets with your own hands.

To complete it, you need to make a suitable number of flowers from ribbons (roses are most often chosen) and stick them on a foam ball with a handle. For greater strength and beauty, you can stick a needle with a stone at the end into the middle of each flower. The handle must be wrapped with a strong satin ribbon. As additional decor, you can use rhinestones and pearl beads.

Flowers made from satin ribbons are an effective way to decorate accessories, household items, children's items, and even make a wedding bouquet.

Video on how to make flowers from satin ribbons with your own hands

How to make roses from satin ribbons with your own hands, watch the video:

We make flowers with our own hands from satin ribbons:

Nata Karlin

A wedding is an exciting and, at the same time, troublesome event. However, those who have already passed this significant day say that It’s worth preparing for it in advance. Many do this, creating a banquet table menu, choosing outfits and decorations for the celebration, but how to create a bouquet of flowers for the bride a few days or weeks before the wedding?

Bouquet of satin ribbons as an alternative to standard flowers

Photo of a wedding bouquet made of satin ribbons

Flowers are fragile and very whimsical gifts of nature. Many brides know that a bouquet can turn into a limp broom even before registration begins. The sun, heat or frost nullify the work of florists. And not always what is created by someone else’s hands may please a young girl, and there is simply no time to change anything.

Photo of a small wedding bouquet made of satin ribbons

More and more girls are resorting to bouquet made from satin ribbons with your own hands. In addition to practicality (it will not wither), this composition has several more advantages:

1. You can create it yourself, which does not require special knowledge and skills, but will definitely save the budget of a young family.
2. Slowly collecting a bouquet, a girl can find many shades of satin ribbon if the wedding is planned in a certain theme and color.
3. The bride will assemble the desired composition and won't get an unpleasant surprise on your wedding day in the form of the “wrong bouquet”.
4. All this splendor, created with your own hands, will carry the energy of the young lady and will remain a wonderful memory of yourself. happy day for newlyweds for a long time.

Blue wedding bouquet of the bride made of satin ribbons

One of the varieties of this option for decorating an image is a blue wedding bouquet of the bride made of satin ribbons. A huge palette of different shades of this color will allow you to give the final look to the composition, capable of satisfying even the most demanding girl. A similar color background accompanies a wedding in winter time years when nature itself showcases a stunning combination of blue and white. In addition, this particular shade suits many brides.

Also, this color is in tune with early spring, when nature has not yet awakened, and the blue of the sky is simply dizzying

By adding a little green tone to the ensemble, you can create a beautiful finished piece called a bridal bouquet.

Many girls tend to experiment and resort to very contrasting and bright composition design options. An example of this is the popular bridal bouquet made of red satin ribbon.

Popular bridal bouquet made of red satin ribbon

Satin is perfect as a material for creating flowers. He has the following characteristics:

• strength;
• one side of the ribbon is glossy, which allows you to give the flower volume and brightness;
• a huge color palette that gives room for creativity.

Ribbon rose for the bride's wedding bouquet

The red tint makes it possible to create delightful roses from ribbons for the bride’s wedding bouquet, peony flowers, poppies - there is no limit to your imagination. All flowers that have red petals in nature can be recreated using simple tools and a satin ribbon.

Very popular today Japanese technique of creating flowers - kanzashi. This is a special art form that can delight you with the craftsmanship and unique nuances of the finished flowers.

Translated from Japanese, this word means a hairpin, but the end of this hairpin is slightly wider and decorated with flowers.

Traditionally, brides prefer to choose a pink shade for their bouquet - this symbol of tenderness, chastity and femininity. Despite the free views of young people on many things, a wedding is still a symbol of traditions and rituals. Therefore, a pink satin ribbon becomes simply indispensable for creating a magnificent wedding composition. Many flowers were created by nature and breeders, the buds of which have a pink tint. You can decorate such splendor with beads, brooches, rhinestones, butterflies and so on - it all depends on the preferences and taste of the young bride.

Bridal bouquet of pink satin ribbons

• a ruler and scissors can be found in every home;
• Every housewife also has a needle and thread, no need to buy it;
• lighter or matches;
• a glue gun and the glue itself may have to be purchased;
• pins, needles with beads, rhinestones, beads, brooches - all this can be bought very inexpensively;
• The base for the bouquet is also sold in stores among craft supplies and costs little.

How to make a bridal bouquet from satin ribbons with your own hands

Kanzashi technique for making flowers from satin ribbons

To have an idea of ​​how to create a luxurious floral ensemble with your own hands, it is better to familiarize yourself with the information - watch a master class from professionals. To create a bouquet, you first need to learn how to make flowers from ribbons. There are different techniques for creating buds, but many people today know the simplest ones, which at the same time produce beautiful flowers. These options are explained step by step, how to make a rose or peony flower:

1. The satin ribbon needs to be folded in half, with the glossy side out. Then fasten the entire ribbon with a bait thread, along the edges slightly at an angle and tighten the thread, collecting the ribbon into a flower, folding it into a bud along the way. Sew everything at the bottom, securing the flower.
2. Wrap the ribbon diagonally to create a right angle. Make three full turns of the tape, fasten everything with a thread - you get a bud.
3. The edge of a small piece of tape is bent at a right angle, then again, and so on until the tape runs out. Then a short piece of tape is taken, both edges are bent at right angles and the whole thing is stitched with thread, tightening it slightly. It turned out to be a rose petal. This petal is sewn to the main flower. The petals should be sewn on in this manner until the flower is completed.

Master class on how to make flowers from satin ribbons

Step-by-step instructions will help every girl create the bouquet of her dreams, which can become a symbol of love and happiness. In addition, you can create trial flowers while the bride is still studying, and eventually arrange several wedding bouquets so that you can choose the most perfect one.

If you make a composition with your own hands, it will help not only to highlight the bride, but also to create a unique style and image, adhering to the theme of the wedding celebration

The main condition in this exciting business is patience and love with which this composition will be assembled. Mk will not only allow you to observe all the nuances, correctly fix flowers on the base, luxuriously decorate a ready-made bouquet, but also quickly, and most importantly, create a magnificent floral ensemble at a professional level.

Ribbons for the bride's bouquet

The length and width of the ribbon depends on how large the flowers will be (width) and how voluminous (length) the bouquet will ultimately be. For an average bouquet you will need approximately 15 meters of ribbon with a width of 50 mm. However, the girl herself will decide how many ribbons are needed for the bride’s bouquet, creating a trial composition.

Another important detail is the basis of the future composition. It can be made from foam plastic, a wad of newspaper tied with twine, or it can be a purchased blank. You can glue ready-made flowers to this base or pin them with needles with a bead at the end - it will become a kind of stamen of each flower. The handle of such a bouquet will be a cardboard base made from baking paper or foil, as well as several sticks held together with tape. You can wrap such a handle with a wide white satin ribbon and decorate it with a bow.

To understand in more detail the features of creating flowers from satin ribbons, it is better to watch the video of a master class on making a bridal bouquet from satin ribbons:

June 5, 2018, 00:37

You can buy a ready-made bouquet for your wedding, reducing wedding hassle. Or you can surprise your guests with a hand-made bouquet.

An important attribute of a wedding celebration is the bride's bouquet. The symbol of the groom presenting a bouquet to the bride on the wedding day is confirmation of the proposal made to his beloved. If the bride accepted the bouquet, it means she agrees to marry him.

The bride should not let go of the presented bouquet until the very beginning of the banquet. Therefore, the bouquet is an integral part of the wedding wardrobe. The selection of which must be taken no less carefully than any other part of the bride’s image.

You can order a wedding bouquet from a florist. But suddenly, despite all the advantages of a specialist, the bouquet will not be to your taste. To avoid disappointment and spoil the important day of your life, you can prepare a wedding bouquet with your own hands.

Wedding and flowers

How to make a bridal bouquet with your own hands?

In order to make a wedding bouquet with your own hands convenient and beautiful, you must follow the manufacturing sequence:

Choosing a form.

• A round bouquet is the most popular. Suitable for almost all brides. With the exception of girls with short stature.

For such a bouquet, different flower combinations are usually used, either roses or lilies. The bouquet is made in the form of a ball with a comfortable handle.

• Bouquet cascading. Or in the form of a drop, a waterfall

Flowers with long stems are suitable here. Choose the length to suit your taste.

This bouquet looks great with a dress with a train. It lengthens your height well and adds a slim figure.

We carry the “cascade” with both hands, holding it at stomach level

• Ball of flowers

A very original bouquet, which is rare in Russia. It differs from a round bouquet in that it is made without a handle. The bride holds it with an attached ribbon or beads.

• Extraordinary bouquet

For lovers of a euphoric release, you can prepare a bouquet in any non-standard form: fans, baskets, muffs, umbrellas. The main thing to understand is that such compositions are very difficult to perform. They require certain skills, patience and effort.

We decide on the size.

There are some nuances that need to be taken into account when choosing the size of the bouquet:

• Large, round bouquet for a lush bride
• Fragile and small girl - miniature bouquet
• Multilayer dress - lush bouquet
• If there are other decorations on the dress in the form of rhinestones, sparkles, beads, or on the bouquet, we exclude decorations.

Select a handle.

In order to hold the bouquet comfortably, you need a comfortable handle. We make it from flower stems or use a porta bouquet maker. This is a convenient device for holding a bouquet, while nourishing the flowers with moisture due to the installed damp sponge.

Choosing flowers.

• We choose flowers so that they stand out against the background of the dress. It is better to choose contrasting colors. To the red bouquet - add pink, white, yellow. To yellow - lilac, red, blue. To pink - a variety of colorful tones
• The most popular bouquets for brides are roses. Roses symbolize love, beauty, devotion. Retains very well and for a long time appearance. Therefore, they are most in demand when composing a wedding bouquet.
• Lilies are a little inferior. But they are undoubtedly popular. Their beauty represents hope, happiness, purity
• Brides from high society are supposed to give orchids and myrtles.
• Tulips are good for spring
• Depending on your taste, you can make a bouquet of any flowers: peonies, asters, camellias, daffodils, callas, lilacs

To make any bouquet with your own hands you need:

• Fresh flowers and leaves
• Satin ribbon
• Silicone based adhesive
• Portbouquet
• Needles
• Any decorations to taste

Video: DIY wedding bouquet

Wedding bouquet of roses

Vintage bouquet of roses The vintage version of the wedding bouquet looks gorgeous.

• In addition to the main materials, we prepare in advance a variety of brooches, beads, earrings, stones and wire
• Attach cut pieces of wire to each decoration
• Carefully insert large decorations into the tied roses. We alternate them with small ones. Forming a composition
• We tie all the stems and decorate with satin ribbon
• We string beads onto a wire 7-8 cm long and make hooks out of them. We fasten each one to a long wire. Wrap with satin ribbon. Decorating the bottom of the composition
• We take 1.5 m of taffeta tape, corrugated by threading the wire. We connect the edges with glue. We put a skirt on the leg of the bouquet. We decorate by wrapping it with medium-width ribbon. We decorate the top a little more with a thinner ribbon. Decorate with rhinestones

Video: Wedding bouquet of green roses

white wedding bouquet in the shape of a waterfall

A very original white bouquet made by a waterfall is obtained.

• We choose flowers of different degrees of maturity and sizes
• We form a bouquet, starting with the largest flowers, ending with small ones
• Making such a bouquet is no different from the process of making a round bouquet described above
• It all depends on your imagination

Video: Bouquet of white roses. Flower sketches

To create a bouquet of satin ribbon you need:

• Bouquet foot stick
• For the base of the funnel
• Floral base or foam ball
• Rigid mesh or lace
• Ready-made store-bought stamens
• Scissors, wire, needle
• Ribbon, the choice of width depends on the size of the desired rose
• Glue gun

Let's get creative:

• To make a handle, wrap it with satin ribbon. Handle length is at least 12cm. We straighten the remaining tails of the tape in four directions
• We decorate the funnel with a mesh and glue it to the handle, where the tape sticks out
• We attach the ball to the funnel with glue

Let's move on to the flowers:

Step-by-step production flowers

• We burn the edges of cut pieces of tape up to 5 cm long. So that the fabric does not get wet. Leave two 3 cm squares of tape to make the core. We glue the two upper corners of the fabric. We bend the two lower corners, gluing them in the middle of the petal. We do this with all the prepared fabric.
• Roll the prepared tape, 3 cm in size, into a tube. Secure with glue. We also wrap this tube with the next one. Sew and glue them together
• Glue the finished petals in the center of the circle so that the new one extends slightly beyond the edges of the finished one.
• The first stage is over. We prepare a composition from selected sets of flowers, glue ready-made flowers along the diameter of the circle
• Decorate with brooches, beads, rhinestones. Exactly the same as the above-described sets of compositions

Video: Wedding bouquet made from ribbons

Round wedding bouquet of peonies

Making a round wedding bouquet of peonies:

• We cut the stems to the same length 20-25 cm
• We clear the stem of thorns, leaves, twigs
• We tie the four largest peonies with tape, the most blooming ones
• Add the rest of the peonies to this base in a circle, creating the composition you like. Secure with tape
• We wrap the peony stems with the same material from top to bottom, forming a handle. Fix with pins
• Add decorations if necessary. Don't forget to secure it firmly with glue or pins.

Video: Wedding bouquet of lilies of the valley and peonies

Wedding bouquet of tulips in a porta bouquet:

• Soak the portbucenica sponge with water
• We wrap the prepared leg with a satin ribbon, from top to bottom. We fix the layers one by one with silicone glue or a glue gun
• Place the prepared stem into the vase
• Cutting tulips to the desired length
• Insert one at a time into the designed tube
• We design any composition
• Checking for empty space. Carefully hide the sponge
• Decorate with green branches, bows, beads, rhinestones
• We fix leaves, rhinestones, beads with a glue gun. Lace - needles

a set of flowers in a porta bouquet can be formed from any flowers.

White wedding bouquet in a porta bouquet

Video: Making an original bouquet of tulips

Wedding bouquet color

An important factor is the choice of color for the wedding set, not only for the purpose of an aesthetic and harmonious appearance, but also taking into account the psychological factor of color perception. The bouquet's palette can lift or worsen your mood, since each color has its own meaning.

Red wedding bouquet

It is customary to give red roses to the lady of the heart thanks to an ancient legend. One day, the goddess of love Aphrodite, running to meet her lover, accidentally pierced her foot with a white rose thorn. Beautiful White flower turned blood red. This is why red roses are associated with the symbol of love.

It is not necessary to present only roses. The color red suggests authority and activity. Any red composition can evoke a feeling of satisfaction in a bride with such a character.

White color of wedding bouquet

The white color of flowers means naivety, gullibility, purity and morality. Therefore, white flowers are presented to chaste girls. Giving a white bouquet to the bride for a wedding is considered a good omen, promising a long and comfortable life. family life young.

Pink color of wedding bouquet

Pink color means hope, modesty, love. This is a pleasant sign for a wedding celebration. The beginning of a new, pleasant stage of the relationship.

Yellow color of wedding bouquet

Don't be afraid of yellow in your wedding bouquet. The times when this color was associated with treason and betrayal are gone. Now a bouquet of this color is a sign of joy, fun, happiness and optimism.

Blue color in a wedding bouquet

The blue color of the wedding bouquet will appeal to mysterious, enigmatic girls. After all, this is what the color blue means. The composition, with the advantage of blue, speaks of great fidelity, devotion, and nobility of the groom. Very strong and pure love.

Orange color in wedding bouquets

It is better for the groom to avoid this tone in a wedding bouquet. Since it is most often presented to superiors, it is a sign of admiration for authority.

Wedding bouquets for the bride photo

Bright wedding bouquet of fidelity

Vintage bouquet for wedding

Tenderness, purity, freshness

Bride and white bouquet

Roses and wedding

Variegated bouquets for weddings

Options for passionate, red bouquets for a wedding celebration

Delicate white wedding bouquet

White flowers with delicate greenery

Wedding bouquet with lavender









Exquisite wedding bouquet















The color of devotion in a blue wedding bouquet

You can make very beautiful wedding bouquets with your own hands. If you have desire, patience, perseverance, a penchant for creativity and taste. It’s worth trying in advance and making your own wedding bouquet. If in doubt, contact your florist. Surely, a good florist will offer many options to find something suitable. Or maybe something from the photos above will suit you.

Video: DIY bridal bouquet with pink hydrangeas

Wedding bouquet of satin ribbons - great option for brides. The tradition of making wedding arrangements from ribbons has come into fashion quite recently, but has already become widespread in Russia. A wedding is, without a doubt, the most important event in the life of any girl. On this day the bride is more beautiful than ever. In order to convey the bright personality of the bride, you need to come up with something unusual, so now many girls, getting ready to walk down the aisle, make their own bouquets. Each such composition is a real work of art. Most often, satin ribbons are used to create beautiful roses and other flowers.

What is a wedding bouquet for?

A wonderful white bouquet is an integral part of any bride’s festive outfit. Of course, you can buy fresh flowers in any store on the eve of the wedding, but this is not always possible. In this case, you shouldn’t be discouraged, because you can simply make a wedding bouquet from scrap materials. Artificial roses for their beauty in no way inferior to natural ones, and you can use them not only for a bouquet, but also for decorating a boutonniere.

For those who do handicrafts, making a chic bouquet of ribbons will be quite easy. Of course, you can get married without flowers, because the main thing in marriage is mutual love. However, according to sociological surveys, most girls would still like to have a bouquet because:

There is also an old wedding tradition that is still observed on many holidays. The bride throws her bouquet to her friends, and the one who catches it, according to folk signs, will get married soon. Therefore, the girlfriends of the main hero of the occasion usually look forward to this moment.

Choice of color and material

When developing the color scheme of a wedding bouquet of ribbons, you should take white as the basis - the color of innocence and youth. Satin ribbons for making flowers can be purchased at craft stores. And also, many craftswomen use old lace (for example, frills from dresses that have gone out of fashion, but are well preserved). Most popular flower- this is, of course, a rose, but other options are possible, depending on the bride’s outfit, as well as her tastes and preferences.

A bouquet of ribbons with your own hands is not only beautiful, but also original. For work, it is best to use wide satin ribbons. Narrow ones are not very convenient, since they are easily pulled together and twisted, as a result the flowers can turn out uneven, ugly, and deformed. You can also use velvet and other fabrics that are pleasant to the touch. Some elements are made from corrugated or crepe paper, but this is a good option only if the holiday is guaranteed to take place indoors. Otherwise, if it suddenly rains during the event, all the beauty will get wet and instantly lose its festive look.

As for the color scheme, for a young girl who is getting married for the first time, of course, all shades of white are best suited. The main thing is that this shade matches the tone of the wedding dress. White is not only the color of snow, but also “the color of baked milk”, “the color of champagne splashes”, “the color of pearls shimmering with mother-of-pearl”.

But if a woman gets married in mature age, and this marriage is repeated, you should not choose white. Firstly, white is a symbol of innocence, purity and youth. Secondly, this color is bright opens all defects skin: wrinkles. dashes, dark spots. And finally, thirdly, if the wedding is held outdoors and the program includes active entertainment, white is not entirely practical. Therefore, you can choose other options, for example:

Other color options are possible, it all depends on the wedding dress. The main thing is not to match the suit to the bouquet, but to match the bouquet to the suit. When the dress and shoes have already been ordered, it's time to start making the bouquet.

Features of manufacturing and decoration

To do festive bouquet for the bride from satin ribbons, you need:

Experienced handicraft masters use the most... different materials: beads, seed beads, sequins, rhinestones, even precious and semi-precious stones. When decorating a flower arrangement, you must keep in mind:

Combination of fresh and artificial flowers

The highest class of floristry is considered to be a combination of living and artificial flowers, which looks impressive, natural and harmonious. When forming such a composition, you must keep the following in mind:

Basic requirements for a flower arrangement

A do-it-yourself bridal bouquet made of satin ribbons should go well with wedding dress and decorations. And, making a flower arrangement with with your own hands, keep the following in mind:

Main the advantage of a homemade wedding bouquet made from silk or satin ribbons is that artificial roses will not wither. Such flower composition will “live” for many years and will awaken in my head for a long time Nice memories associated with the most solemn day - birthday new family. Satin roses are a great way to make even the most modest wedding celebration bright, unusual and unforgettable.

Not a single wedding salon or store selling decorative goods is complete without flowers made from satin ribbons. Photos of festive decorations amaze with the variety of shapes and colors. Often this “extravaganza” surprises not only with its beauty, but also with its prices, so many needlewomen decided to make a decisive move - to learn how to create flowers from satin ribbons with their own hands. The result was so stunning that many opened their own mini-shops with affordable prices for finished products for those who do not have time to do handicrafts, and websites where they give handmade lessons to everyone.

Flowers made from satin ribbons (step by step instructions)

Before you start creating masterpieces, you need to decide what and what type of flower we need. Next, all that remains is to prepare the tools and materials and you can start creating.

What may be required

Advice! It is worth using ribbons of different widths - this way the flowers in the overall bouquet will look more diverse.

1. Satin ribbons. We focus on the intended purpose: if it is a gift, we take bright, rich shades of red, orange, yellow, scarlet, etc. For a middle-aged lady, it is better to mute the tones and turn to burgundy, and for a young girl, choose pastel colors - pink, lilac, white, etc. A separate topic is wedding accessories. Here you should not deviate from the classics, and if you do not have a revolutionary red or black dress, it is better to create a composition from a white and blue palette or light yellow and green shades.
2. Scissors.
3. Threads. And it doesn’t have to be in tone - they can be anything.
4. Set of sewing needles.
5. Glue gun or just glue; the main thing is that the tube has a sharp tip.
6. Lighter - you will have to set the silk on fire. So that the cut edges do not unravel.
7. Tweezers are needed to protect your fingers when working with fire when burning the edges of the ribbons.
8. Wire – it will be needed to secure many elements.
9. Additional items - headbands, hairpins, baskets, foam, gift paper for bouquets, beads, rhinestones, etc.

Advice! If you don't have a lighter, but you're already inspired, you can use a lit candle.

Tools needed to create satin ribbon flowers

If you're going to be making hair accessories, you'll need a hair clip or headband; if you are planning an ikebana or a basket of flowers, prepare wicker containers and foam plastic - flowers attached to wire will be stuck into it. You can also use decorative flowers to decorate photo frames for yourself or as a gift.

Creation options and technology

It is not difficult to make a flower from satin ribbons, guided by the photo and description of the step-by-step technology.

Simple version for working with children

Let's move in measured steps from simple to professional. In order not to kill the soul's wonderful impulses with the first disappointment, there is no need to take on the most “twisted” versions. Beginning creators and children should practice from the basics, and then move on to more complex options.

Let's practice on the rims. For this we need a couple of ribbons and two beautiful decorative buttons. We take a narrow ribbon and cut several strips from it, the length of each petal will be equal to a quarter of each strip, so we mentally divide the piece of ribbon into 4 parts and determine the size of the flower with the rim. Having found right size, prepare 3-5-8 stripes, depending on how many daisies you want to see on your rim.

Advice! To prevent the ribbons from fraying, use a candle flame or a lighter to touch them along the edges.

Place a drop of glue in the middle of the strip, lift the ends, bring them to the center and glue them. We get several blanks, form them into a daisy, gluing them together in the middle or sewing them with a needle and thread. Sew a decorative button into the middle.

We coat the headband with glue, wrap it with a plain ribbon, and sew or glue daisies on top. One daisy can be attached with wire to a clip-on hairpin.

Poinsettia

From satin and other fabrics you can create not only the usual roses and daisies: let’s try to “grow” a poinsettia in half an hour. The satin consumption will be small, and the effect will be unusual.

Materials:

• white and green ribbons;
• scissors;
• lighter;
• glue;
• felt;
• beads and sequins.

Progress:

1. Cut several pieces of green ribbon 6-7 cm long and cut out the shape of the leaves.
2. We burn each piece, holding it over the flame with tweezers, so that the material becomes slightly wavy.
3. We bend each sheet lengthwise and pass it over the fire again to create a longitudinal strip.
4. We make petals - cut 10 pieces of white tape, half 7 cm, the other half 5 cm.
5. We cut out the petals and burn them along the edges.
6. We form the middle, take felt, cut out a circle.
7. We gradually glue leaves and petals to the circle of felt in tiers - the way a poinsettia should look.
8. We glue sequins and beads in the middle to disguise the rough work.

Almost a narcissist

We cut five yellow strips of the same length, mark the middle, pinch and glue the opposite edges in the middle, getting bows, and treat the edges with fire. We fold each bow in half and glue it from the bottom edge, then we collect all the petals on a thread, pulling them together in the center so that there is no hole, forming a flower. Sew an orange button in the middle.

Wild rose hips

We make patterns for petals - we draw templates for three types of petals, reducing them by a centimeter. For example, one is 7, the second is 6, the third is 5 cm. We fold ribbons of the same color, but of different widths several times. To speed up the process, we apply templates and cut out several blanks at once.

As a result, we get three types of petals, 6 pieces of each type. We process all the workpieces in advance over the fire, and then assemble them one by one in tiers. First, in a circle with each other, then we attach the lower one to the larger tier in the middle so that there is a hole in the middle between all the tiers.

You can easily create beautiful peonies from satin with your own hands

• We make stamens - we glue pieces of light felt imitating pollen onto pieces of straw or plastic thin and bendable white tubes. Bend slightly in different directions.
• We squeeze the flower from below in the area of ​​the hole, insert the stamens and wrap the base with thread, sewing the structure tightly so that it does not fall apart.
• You can make leaves - fold a rectangular piece of tape 10 cm long with its corners towards the center and stitch it. We tighten the thread at the base and sew it up with a hidden stitch from the inside out. We make another sheet of slightly smaller size and place it on a circle of green felt. We place the rose itself on this blank.
• If you attach a pin to the back, you will get a beautiful brooch.

Complicated flower made of satin ribbon: master class

Now let's look at a more complicated version of a composite flower made from individual petals of a more bizarre shape. Let's take the rose.

Start:

• prepare 4 petals 5 cm long;
• bend one edge of each petal at an angle of 45°;
• heat and fix with tweezers;
• We repeat the same procedure on the other side, we get diamond candies.

Making the middle, outer petals and leaves:

We bend four pieces of 5 cm each on both sides, sewing them together with threads, forming a small gather along the seam. These are the middle petals. We also make the outer petals from pieces 7 cm long, there should be 8 of them.

We cut out leaves measuring 2.5 x 5 cm, burn them, and make folds. We form veins - we bend and heat the leaves, squeezing them hot.

Assembly:

• We twist the first piece into a tube and glue it together;
• We attach the remaining 3 around, getting the middle of the bud;
• We fasten the outer and middle leaves around the perimeter, forming the blooming part of the flower;
• glue the leaves, attach a pin.

Kanzashi flowers made of satin ribbon

The term “kanzashi” came to our lands from Japan, where once upon a time the best geisha decorated their hair with homemade flowers, secretly competing in skills. This is what they called hair decorations. Kanzashi flowers differ in shape and complexity. Let's consider the most popular option.

The technique is simple - many identical petals are made, but different in size. Then they are assembled in tiers using a needle, thread and glue, distributed evenly around the middle, which at the end is crowned with a shining large diamond, in our case a rhinestone.

The lower tier is formed from the largest petals and strung on one thread, then the second tier and so on, gradually decreasing in size towards the center. After this, the layers are stacked on top of each other and secured with glue.

You can make any kind of flowers this way, the main thing is to create the desired shape of the petals.

Sharp kanzashi petals for dahlia

We cut off squares measuring 5 x 5 cm, fold them in half diagonally twice, pinch them at the edge with tweezers, and remove the frayed parts. We solder the ends with fire. Then the raw corner is trimmed and also soldered by fire in its folded form.

Nature is not always able to delight our eyes and satisfy the need for contemplation of beauty. Beautiful fabric, especially satin, allows a miracle to happen and gives us and our loved ones a magical garden in bloom all year round. The manufacturing technique only seems complicated, as you might think when looking at the finished masterpiece. However, turning to step by step instructions, we understand one thing: the eyes are afraid, but the hands do. The work is so captivating that in the end you can only be surprised at your own professionalism and think about starting your own business related to decor.