All about car tuning

How to change a combination lock. How to change the code on a suitcase lock? Main types of combination locks

Many suitcases are equipped with a lock, and if you want to be sure that your belongings are safe, choose this model. Of course, there is no guarantee that the thief will not deal with it in a few seconds, but at the same time there is hope that he will simply bypass him. When purchasing a suitcase, it will already have a certain code installed on it by the manufacturer. But if you don’t like the combination and you can’t remember it, replace the numbers with others.

How to change the code on a suitcase: simple ways

Worried about your safety? In this case, you need to get not an ordinary suitcase, but a model equipped with a lock. It is important not to forget the code you entered, otherwise you will have to spend several minutes later trying to open it.

How to change the code on your suitcase if you forgot it? It all depends on what type of lock is installed. Based on this information, you can choose a method.

If everything is simple with the factory settings, then if you have already set the lock to a certain code, but have forgotten it, the situation becomes much more complicated. First of all, go through the combinations of numbers that you could use. If the suitcase still fails to open, turn the dials and listen to the sounds. The click indicates that you need to stop the disk, this is the appropriate number. Repeat the same on the remaining numbers.

Model with lever lock. The accessory must be closed. Inspect the lock; there should be an almost invisible lever on it. If you cannot find it, inspect the area near the dial or the inside.

Found it? All that remains is to configure the default combination of numbers - four zeros (or three zeros, depending on how many digits the code contains).

Next to the dial you will find an almost invisible button or lever; you need to press and hold it. If it's a lever, push it down, then push it down as far as you can with your finger.

The castle is ready for new settings! All you have to do is select the numbers you need. After selecting the numbers, move the lever to its original position.

Model with padlock. Close the lock and enter the combination set by the manufacturer. Pull one of the arms out of the lock hole, turn the lever 90 degrees and press and hold it. Enter the digital combination you need, then release the lever and move it to the position when the lock is closed. We turn the dials and enter a new combination into the lock.

Model with push-button lock. First, you need to unlock it; to do this, enter the standard manufacturer code - zeros. Now we proceed to select a new set of numbers and while we are setting up the dial, hold the button and do not release it. When the combination is established, release the button.

Factory settings on the lock

The universal code that most manufacturers use is three or four zeros. So if you are trying to change it for the first time, use this particular combination of numbers.

We hope that one of the methods helped you open the combination lock and change old code on new. The more complex the code, the less likely it is that a thief will be able to break in and steal something.

If you were unable to open the lock and find the required code, we recommend contacting a specialist. Don't throw away your suitcase, right?

Castles are one of the possible ways restrict unwanted entry into some confined space. Such products are used not only in door systems, but also in other locking mechanisms.

A combination lock is a special device that opens when a certain code combination is entered on a special display. There are several types of such devices, which differ not only in the principle of operation, but also in the complexity of their design.

Changing the code on mechanical locks

There is a division of such devices into push-button and disk-based.

Let's take a closer look at how to recode a lock on buttons:

  1. First of all, we dismantle the top panel. This is relatively easy to do using a screwdriver. In this case, you should see special plates, the number of which may vary.
  2. All these elements have a small corner cut on top. This parameter is the determining factor for coding.
  3. To recode such a lock, these plates should be placed at a bevel towards the inside of the structure. This will correspond to a specific code. If they are all located with the corners cut outward, this means that the lock does not have a code. In this case, combinations can depend only on your preferences and the number of buttons.

This procedure should be performed by opening the door and removing the entire structure.

Recoding electronic locks

This type of device has its own characteristics. Let us consider in detail how to recode Various types electronic locks:

  1. Electronic control devices can be equipped with a special key to change the combination. To do this, you must enter this number from several digits, which depend on the specific type of device. After this, a new numerical combination is installed and the lock is subsequently moved to the working position.
  2. For locks that are recoded using a key, this procedure is even simpler. First of all, it is inserted into a special hole, which in the standard version is located on the side. Then a new combination is entered and the key is removed from its place. After this, the functionality of the structure is checked.

As you can see, recoding locks is relatively simple, which makes it possible to select different values ​​for each person's individual needs. This video will help you perform this operation:

Despite its small size, a lock on your luggage bag or suitcase can give you peace of mind. It prevents unauthorized access and theft of your personal belongings. Each bag model has its own default combination of numbers, usually 0-0-0-0, but each user can change it at any time.

Different models of suitcases have different locking locks: lever, push-button or zippered.

How to change the code on a suitcase with a lever lock?

  • Close your suitcase or briefcase. Locate the small lever on your luggage lock. It can be located on the outside next to the dial or on the inside of the lock.
  • Set the factory default lock combination. Set the dial to "0-0-0-0", if it only contains three digits, set to "0-0-0".
  • Press and hold the small button located next to the watch face. Some bags have a lever next to the dial that you press and push down or to the side as far as possible.


  • Once the lever has been moved to the "code setting" position, turn each dial to select the desired number.


  • After setting the new combination, move the small lever on the lock back from the “code setting” position to the original position. The combination lock has now been reset and you can use the new combination to open the suitcase.


How to change the code on a suitcase with a push-button lock

  • Unlock the bag using the factory combination (0-0-0).
  • Choose a new combination. Press and hold the button while spinning the dials.
  • After the selected combination of numbers, release the button. Place the zippers into the slot locks, double checking that your new combination is installed.


Changing the code on a suitcase with a padlock

  • Enter your lock's factory combination.
  • Pull out one shackle of the suitcase lock.
  • Rotate the lever 90 degrees and then press and hold it in place.
  • Enter your new desired combination.
  • Release the lever and place it in the "closed" position.
  • Turn the dials around a few times and then enter a new combination to test the lock.


Combination locks are divided into two main types: those with the ability to change the numeric combination, which is the cipher for opening, and those with a standard, non-changing code. If possible, it is more advisable to have a built-in function for replacing the working cipher, since they have a higher degree of reliability. How to change the code on the lock? To do this, you should carefully read the instructions provided in this article.

Main types of combination locks

Before answering the question of how to change the code on a lock, you need to understand the types and design features devices. So, combination locks can be:

  1. mechanical. The code on the lock can be dialed:
    • by pressing number keys ();


  • setting the code in a certain order (mechanical disk lock);


  1. electromechanical. Such devices consist of two interconnected blocks: a locking mechanism and a code panel that activates the lock bolt. The individual parts of the lock are connected to each other by an electric drive. The device is controlled using an electric drive, and the secret part is equipped with mechanical elements;

  1. electronic. Both the control and the secret part of the lock are based on electronic components. The lock requires a source of electrical current to operate.


Electronic and electromechanical locks are considered more reliable than mechanical ones.

Self-recoding of the lock

You can change the lock code on any device that has this function. Recoding may require partial removal of the lock or purchasing a special key.

Replacing the cipher on a mechanical push-button lock

How to change the code on a mechanical type combination lock equipped with buttons? To do this you will need to perform the following operations:

  1. Using a screwdriver of the appropriate size, remove the keypad of the lock. This action is necessary to gain access to cipher management;

  1. Inside the lock there are 10 plates (corresponding to the number of buttons), which are installed in a certain position. Each plate has a slight bevel on one side. The working plates, the numbers of which are included in the digital combination, which is the code, are directed with a cut towards the center of the lock. The rest - to the edges of the locking device;


  1. To change the combination of numbers that make up the opening code, you need to turn over the corresponding plates. To do this, you need to remove the lock element from its groove and rotate it around its axis.


The lock must be recoded only with the door open or the locking mechanism removed.

You can learn more about the procedure for changing the code on a mechanical push-button lock by watching the video.

Replacing the code on a mechanical disk lock

Disc locks can also be mortise. The latest devices are usually installed on safes. Padlocks are used more widely. Let's consider how to change the code on a combination padlock equipped with disks. The following instructions should be followed:

  1. the locking device must be moved to the “open” position;
  2. lock the padlock shackle by pressing it;
  3. set the required combination of numbers;
  4. lower the bow and check operation.


The code on the padlock must be changed before using it. The standard digital combination, which is a cipher, consists of zeros.

Changing the code on electromechanical and electronic locks

Electromechanical and electronic locks are similar in design. The locking mechanism is controlled by entering a specific code consisting of various numbers. Moreover, unlike mechanical combination locks, the numbers that make up the numerical combination of the code can be repeated.

To change the code on an electronic or electromechanical device, you must carefully read the instructions supplied with the lock. The cipher can be replaced in one of the following ways:

  1. by introducing a code that switches the locking mechanism to programming mode;
  2. using a special key.

To change the cipher in devices equipped with a transcoding mode, you will need:

  • enter a code that switches the lock from operating mode to coding mode. This code must be included with the device when you purchase it. The cipher can be entered directly using a keyboard located on the lock or additional device, remotely acting on the locking mechanism;
  • enter a new numerical combination, which will subsequently serve as a working code;
  • put the lock into operation mode and check its functionality.

If the cipher that switches the lock into recoding mode is unknown, it is recommended to contact the lock manufacturer or specialists.

Changing the code in locks using a key is carried out in the following order:

  • the key is inserted into a special hole, usually located on the side of the lock. In this way, the device goes into a mode in which the cipher can be changed;
  • introduced new code;
  • the key is removed and the operation of the device is checked.

If the lock can only be recoded using a special key, then it must be included with the device.

The procedure for changing the code on the lock takes no more than 5 minutes. Before replacing the code, it is recommended that you read the instructions supplied with the locking mechanism.

In design modern models suitcases for travel have a combination lock system that prevents unauthorized opening. This precaution helps protect contents from theft in public areas, including an airport or hotel. However, not all new owners of suitcases with a lock know how to set it up correctly and set a personal code that allows the suitcase to be opened only when dialed. It turns out that this can be done quite quickly.

How to change the code on a suitcase - instructions

The locks of new suitcases are always set to a factory code consisting of three zeros - 000. This standard set of numbers must be changed by the owner to prevent spontaneous changes or use by others for their own purposes. There are two types of locks on a suitcase or bag - padded or fixed.

Procedure for setting a code on a fixed lock

To find out how to set the code on your suitcase, read the instructions below:

  1. Open the suitcase, fixing the factory code combination on the lock.
  2. Block the lock code using a special button or lever on its side.
  3. Keep the button pressed. If it is a lever, you need to move it to the right, then up.
  4. When the button is pressed or the lever is installed in the indicated position, it is necessary to change the code on the lock by setting the desired combination.
  5. Immediately after setting the combination, you need to release the button or return the lever to its original starting position.

How to change the code on a padlock

To learn how to set a code on a suitcase with a combination padlock, read the following instructions and follow the necessary steps:

These simple instructions will allow you to protect your suitcase with a new individual code on the lock and protect yourself from theft. In both cases, it is necessary to accurately remember the entered numbers in order to avoid the unpleasant situation of a locked lock at the most inopportune moment. If you're not sure you can store a set of numbers in your head, use combinations that only you know, such as your date of birth. You can, of course, write down the combination and store it in your personal notebook.


There are times in everyday life when it is necessary to replace the lock on a door or set a code on it. Many owners believe that it is impossible to do this without preparation, and resort to the help of services that deal with similar tasks. However, you can completely do without their intervention, using our proposed option for putting into operation a door combination lock of the German brand “Format”.

The procedure for changing or setting the code on the door lock

Changing the code on the lock must be done from the inside of the door. This operation cannot be performed from the outside. If it is necessary to replace it on the front side, complete dismantling of the door will be necessary.

  1. First you need to leave the door in open form, close the lock.
  2. Next, you need to dial the initial code recorded when installing the entrance lock.
  3. There is a mark on the lock disk for changing the code; you will need to find it.
  4. It is necessary to set the last number on this label.
  5. For further actions you will need a key to the lock. It is installed into the lock from the inside until it stops.
  6. The key is turned 90 0 clockwise without sudden movements until it reaches the “CHANGE” position.
  7. When the key is installed in the lock, a new code combination is entered.
  8. To enter the first digit from the code combination, you need to turn the dial counterclockwise four times, setting the “change code” position opposite.
  9. The second digit is entered by rotating the dial in the opposite direction three times, reaching the opposite position relative to the code change mark.
    10. The third digit is fixed after turning the lock dial twice completely counterclockwise at the above position.
    11. After this action, the special key to the lock is turned to the “INSERTION” position and pulled out.

This organized instruction will help you set the code on your door lock without much effort, quickly and reliably. All actions must be performed in a clearly specified sequence. Any change in its execution may render the lock unusable in the future due to its automatic locking.

If you doubt the reliability of carrying out the proposed operations on your own, then it is better to seek help from specialists who provide services in this format. Fortunately, there are currently plenty of companies providing professional assistance in solving problems of changing and installing code. A qualified worker will quickly be able to determine the type of coding and reset the code door lock and undertakes to keep the final data confidential.

Instructions for use

You bought a new suitcase with combination lock and don’t know how to set your combination correctly? Don’t worry, every second traveler asks this question after making a purchase.

Let us immediately reassure you that there is nothing complicated in this procedure. A couple of minutes is enough, and your suitcase will become an impregnable fortress for everyone except its rightful owner.

For any model, the factory lock opening code is initially set to three zeros - “000”.


For fixed combination lock:

Important– do not press the button / change the position of the lever before you finish typing the numbers. This may result in the wrong code being installed.


For padlock combination:

Well, your personal code has been installed! Now the most important thing is to remember the saved combination of numbers! Choose a number that you know you won't forget. These could be your birthday, postal code, or just your lucky number.

If you forget the set code, opening the suitcase may become big problem. You will either have to spend a long time and persistently trying out all possible numerical combinations, or take your suitcase to a warranty workshop and ask for help from specialists. This is not so scary if you are just going on a trip. What if you are in another country and all your things are locked inside? It’s better to play it safe and write down the digital code, hiding it in a safe place.

Most modern travel suitcases come with a special combination lock that prevents the suitcase from being opened, which means the theft of your personal property at a hotel or airport. Many people who bought such a suitcase do not know how to properly set up a combination lock. You can set a new code on your travel bag in a couple of minutes.

By default, suitcase locks are set to the factory settings - the opening code is 000. Leaving the default code unchanged can be dangerous, so take care to change it. First, determine what type of lock on your bag is a fixed or padlock.

If the lock is fixed, open the suitcase by setting the combination lock to the factory combination, and then find the lock code lock button, which is usually located on the side of the suitcase and looks like a button or a lever.

Take a thin, sharp object, such as a toothpick, and poke the code lock button or slide the lever to the right and up. While holding the button in this position, change the combination of numbers in the lock, and then release the button or return the lever back to the position in which it was. Now your suitcase will only open after entering a new code.

If the suitcase is equipped with a combination padlock, first open the lock by turning the metal arc 90 or 180 degrees and press it inward. Hold the metal arc in the depressed position and at this time enter new numbers by turning the dials of the lock. When the correct numbers are set, release the lock clasp.

Remember the set code as best as possible so as not to encounter the inability to open the suitcase at the most inopportune moment. You can write the code down in a safe place and also use the first digits of your date as the code.

Despite its small size, a lock on your luggage bag or suitcase can give you peace of mind. It prevents unauthorized access and theft of your personal belongings. Each bag model has its own default combination of numbers, usually 0-0-0-0, but each user can change it at any time.

Different models of suitcases have different locking locks: lever, push-button or zippered.

How to change the code on a suitcase with a lever lock?

  • Close your suitcase or briefcase. Locate the small lever on your luggage lock. It can be located on the outside next to the dial or on the inside of the lock.
  • Set the factory default lock combination. Set the dial to "0-0-0-0", if it only contains three digits, set to "0-0-0".
  • Press and hold the small button located next to the watch face. Some bags have a lever next to the dial that you press and push down or to the side as far as possible.


  • Once the lever has been moved to the "code setting" position, turn each dial to select the desired number.


  • After setting the new combination, move the small lever on the lock back from the “code setting” position to the original position. The combination lock has now been reset and you can use the new combination to open the suitcase.


How to change the code on a suitcase with a push-button lock

  • Unlock the bag using the factory combination (0-0-0).
  • Choose a new combination. Press and hold the button while spinning the dials.
  • After the selected combination of numbers, release the button. Place the zippers into the slot locks, double checking that your new combination is installed.


Changing the code on a suitcase with a padlock

  • Enter your lock's factory combination.
  • Pull out one shackle of the suitcase lock.
  • Rotate the lever 90 degrees and then press and hold it in place.
  • Enter your new desired combination.
  • Release the lever and place it in the "closed" position.
  • Turn the dials around a few times and then enter a new combination to test the lock.


Instructions for use

Have you bought a new suitcase with a combination lock and don't know how to set your combination correctly? Don’t worry, every second traveler asks this question after making a purchase.

Let us immediately reassure you that there is nothing complicated in this procedure. A couple of minutes is enough, and your suitcase will become an impregnable fortress for everyone except its rightful owner.

For any model, the factory lock opening code is initially set to three zeros - “000”.


For fixed combination lock:

Important– do not press the button / change the position of the lever before you finish typing the numbers. This may result in the wrong code being installed.


For padlock combination:

Well, your personal code has been installed! Now the most important thing is to remember the saved combination of numbers! Choose a number that you know you won't forget. These could be your birthday, postal code, or just your lucky number.

If you forget the set code, opening your suitcase can be a big problem. You will either have to spend a long time and persistently trying out all possible numerical combinations, or take your suitcase to a warranty workshop and ask for help from specialists. This is not so scary if you are just going on a trip. What if you are in another country and all your things are locked inside? It’s better to play it safe and write down the digital code, hiding it in a safe place.

Combination locks provide high level security of the premises, since they are quite difficult to break into, much less open with a found key or a special master key. Thanks to the development of new technologies, such devices are becoming not only more reliable, but also more affordable every year.. Today, most entrance doors apartment buildings equipped with a combination lock. Owners of office buildings also appreciated the convenience of mechanisms with the ability to open the door with a unique code.

It was possible to ensure a high level of secrecy due to the ability to change the code combination. Changing the lock password may be necessary in various situations. For example, after repair work it is worth changing the code to limit access to workers who knew the previous combination. Also It is recommended to periodically change the code every 3–5 months, since characteristic abrasions may remain on the lock buttons, which will allow an attacker to choose the correct combination of numbers.

Types of combination locks and how to change the code

Today, there are several types of combination locks, which differ in the degree of secrecy and operating principle. Let's look at how the code is changed on each type of lock.

Mechanical combination locks. This type of device is considered obsolete, but, nevertheless, it can still be often found. To change the code on a lock with mechanical buttons, you will need to partially disassemble the case to gain access to special plates. Each of the plates corresponds to a button on the dial pad and has a slight bevel on one side. By removing the plate and placing it at an angle towards the center of the lock, the corresponding button becomes part of the code.

Electromechanical andelectronic combination locks. Such devices are more practical and are very popular due to the possibility of integration into common system access control. Electromagnetic combination locks can be found in almost all apartment buildings, and in last years they have also begun to be in demand among owners of country cottages, where they are installed on the entrance gate.

Changing the code for electromechanical or electronic locks can be done in two ways, it depends on the selected model:

    Using code, which puts the device into programming mode. A special code allows you to put the lock into the mode of changing the code combination, after which you need to enter a new code. Having returned the lock to the standard operating mode, you need to make sure that it works with the new number combination.

    Using a special key. Such models are equipped with a special key; it allows you to put the lock into a mode in which it is possible to set a new code. All that remains is to enter another combination of numbers, remove the key and check the functionality of the device.

Regardless of the type of combination lock, changing the secret combination of numbers is carried out within 5–7 minutes and does not require special skills, but if this procedure seems complicated, it is better to seek help from specialists.

What is a TSA Lock? A TSA lock (TSA lock) is a lock with a customs inspection function. Its main task is to ensure unhindered inspection of your luggage if necessary. TSA locks are required for all travelers planning to travel to the United States.

The TSA Lock was created after the 2001 terrorist attacks in the United States. The TSA (Transportation Security Administration - American Transportation Security Association) scans each passenger's luggage before loading it on board the aircraft. At some intervals, service employees open randomly selected luggage for a more detailed inspection. In this case, if the luggage is equipped with non-TSA approved locks, they will be forced to gain access.

If the baggage is equipped with a TSA lock, if inspection is necessary, customs authorities will open it with a universal master key without confusing the code or damaging the suitcase. There are currently universal keys for TSA locks

TSA-approved locks have a universal master key that makes them easy to open without messing up the code or damaging your suitcase. Only only one has such a key customs services USA, Canada, UK and Israel. Each TSA-approved lock has an identifying mark - a red diamond - indicating that it can be opened with a master key.

Samsonite provides TSA padlocks and built-in locks (attached to the body of the suitcase) on its suitcases, and customs inspection locks are divided into key-operated and combination-operated locks.

If your suitcase has a TSA combination lock, you'll find our guide on how to change the code useful. So how do you change your TSA lock code?


Built-in TSA combination locks installed on suitcases of the Aeris and S"Cure, S"Cure DLX collections


Built-in TSA combination locks installed on suitcases from the Essensis, Colory, BLite Xtra collections

Built-in TSA combination locks installed on suitcases from the Inova, Spin Trunk, and Cosmolite collections

Built-in TSA cable locks for Duranxt Uprights collection cases


Built-in TSA combination locks installed on Cubelite, Cosmolite, Firelite, Skywheeler, Synconn collection suitcases


Most modern travel suitcases come with a special combination lock that prevents the suitcase from being opened, which means the theft of your personal property at a hotel or airport. Many people who bought such a suitcase do not know how to properly set up a combination lock so that it opens only with the code that its owner came up with. You can install a new code on your suitcase in a couple of minutes.
Our video instructions will help you with this:

Locks differ in model, and, accordingly, in the method of setting your personal code.

  • The combination lock is standard.

1) Open the suitcase by pressing the latch, which opens the lock. The suitcase will be open

2) Check the initial combination of numbers - the code should be set to 0-0-0.

3) Press the button to open the lock and, without releasing it, twist the numbers to get the number you need, for example, 123

4)Release the button - the code is set!

  • Your suitcase has a TSA 002 lock.

Many of our clients ask the question after receiving their suitcase: “Where is the key to the lock?”

Currently, the American Transport Security Association (TSA) practices at all US airports special rules inspection of passengers' luggage. Service agents have the right to inspect any luggage that they consider suspicious without the knowledge of the owner. Moreover, if your suitcase or travel bag is locked, authorized TSA employees have the right to break it. However, TSA does not bear any responsibility if luggage or locks are damaged. Agree, not a very pleasant prospect.

TSA representatives themselves suggest that passengers do not lock their luggage, but simply close it securely, or tie it with strong tapes or straps. This may also not suit passengers, since in the process of moving luggage, quite a lot of people come into contact with it, in addition to the owner. And no one will undertake to guarantee complete safety for things.

However, there is another, in our opinion, the most optimal way out of this situation. Modern luggage manufacturers equip their suitcases, travel bags and other travel accessories with a specially designed lock, which by analogy is called a “TSA lock”. By appearance it may be completely different from any other combination lock, but it has one major addition. TSA code locks have a key, which the owner of the suitcase does not have.

Let's explain in more detail.

Regardless of the type of TSA lock, be it a combination lock or a lock with a key cylinder, customs officers and airport services have special universal keys with which such a lock can be opened without breaking. After the items are inspected, the luggage is locked again, and in the case of a combination lock, the personal code, which only the owner knows, is not violated. This allows you to completely eliminate the possibility of the lock being broken during luggage inspection. By the way, in the United States, a similar baggage inspection system that allows lock picking has been in effect since 2002, and currently the countries of the European Union are inclined to introduce similar requirements. Therefore, the TSA lock is relevant not only for those who are going on a trip to North America, but also to Europe.

TSA LOCK 002

The lock is TSA certified by the Transportation Association. Such locks have a special identification mark (red diamond), which guarantees protection against damage during luggage inspection.

TSA Combination Lock Operating Instructions

1) Press the large button located on the side; it usually has the inscription PUSH on it, i.e. "click"
2)
3) Find a small recessed button on the inside of the die - it will be located on the same side where the sliders are removed.
4) Take something sharp - a pencil or a toothpick - and press this button. If the button has sunk inside, remove the pencil and proceed to the next step. If not, keep it pressed.
5) Dial your combination of numbers on the wheels, for example, 1-2-3
6) The last step is to press the large PUSH button (if the button was recessed) or remove the pencil (if you yourself held the button pressed).


The design of modern travel suitcase models includes a combination lock system that prevents unauthorized opening. This precaution helps protect contents from theft in public areas, including an airport or hotel. However, not all new owners of suitcases with a lock know how to set it up correctly and set a personal code that allows the suitcase to be opened only when dialed. It turns out that this can be done quite quickly.

How to change the code on a suitcase - instructions

The locks of new suitcases are always set to the factory code, consisting of three zeros - 000. This standard set of numbers must be changed by the owner to prevent spontaneous changes or use by others for their own purposes. There are two types of locks on a suitcase or bag - padded or fixed.

Procedure for setting a code on a fixed lock

To find out how to set the code on your suitcase, read the instructions below:

  1. Open the suitcase, fixing the factory code combination on the lock.
  2. Block the lock code using a special button or lever on its side.
  3. Keep the button pressed. If it is a lever, you need to move it to the right, then up.
  4. When the button is pressed or the lever is installed in the indicated position, it is necessary to change the code on the lock by setting the desired combination.
  5. Immediately after setting the combination, you need to release the button or return the lever to its original starting position.

How to change the code on a padlock

To learn how to set a code on a suitcase with a combination padlock, read the following instructions and follow the necessary steps:

These simple instructions will allow you to protect your suitcase with a new individual code on the lock and protect yourself from theft. In both cases, it is necessary to accurately remember the entered numbers in order to avoid the unpleasant situation of a locked lock at the most inopportune moment. If you're not sure you can store a set of numbers in your head, use combinations that only you know, such as your date of birth. You can, of course, write down the combination and store it in your personal notebook.

There are times in everyday life when it is necessary to replace the lock on a door or set a code on it. Many owners believe that it is impossible to do this without preparation, and resort to the help of services that deal with similar tasks. However, you can completely do without their intervention, using our proposed option for putting into operation a door combination lock of the German brand “Format”.

The procedure for changing or setting the code on the door lock

Changing the code on the lock must be done from the inside of the door. This operation cannot be performed from the outside. If it is necessary to replace it on the front side, complete dismantling of the door will be necessary.

  1. First, you need to leave the door open and close the lock.
  2. Next, you need to dial the initial code recorded when installing the entrance lock.
  3. There is a mark on the lock disk for changing the code; you will need to find it.
  4. It is necessary to set the last number on this label.
  5. For further actions you will need a key to the lock. It is installed into the lock from the inside until it stops.
  6. The key is turned 90 0 clockwise without sudden movements until it reaches the “CHANGE” position.
  7. When the key is installed in the lock, a new code combination is entered.
  8. To enter the first digit from the code combination, you need to turn the dial counterclockwise four times, setting the “change code” position opposite.
  9. The second digit is entered by rotating the dial in the opposite direction three times, reaching the opposite position relative to the code change mark.
    10. The third digit is fixed after turning the lock dial twice completely counterclockwise at the above position.
    11. After this action, the special key to the lock is turned to the “INSERTION” position and pulled out.

This organized instruction will help you set the code on your door lock without much effort, quickly and reliably. All actions must be performed in a clearly specified sequence. Any change in its execution may render the lock unusable in the future due to its automatic locking.

If you doubt the reliability of the proposed operations on our own, then it is better to seek help from specialists who provide services in this format. Fortunately, there are currently plenty of companies providing professional assistance in solving problems of changing and installing code. A qualified worker will quickly be able to determine the type of coding, reset the door lock code and undertakes to keep the final data confidential.