Knitting sleeveless vests for girls fashion models. Women's knitted vests. Photos and diagrams are stylish, braided, openwork. Patterns, knitting instructions for beginners. Waistcoat with waffle patterns

Women's vests, knitted with knitting needles, have been in trend for about 10 years. In the photo you can see countless options. Once upon a time, the vest was an invariable part of the attire of English dandies.

Fashionistas saw in her a unique charm, slight sexuality, style, and elegance. Today, world-famous fashion designers create vests from various materials, but the most popular are knitted vests.

Women's knitted vests (photos below) can be made in different options to have not one, but several items in your wardrobe.

The most popular will be the following:

When making a knitted vest, you need to think about the color of the future product:

light sleeveless vests can refresh your entire wardrobe and last for several years;
pastel-colored yarn for products is suitable for classic options;
vests knitted with a relief pattern will set off black blouses or sweaters;
It is important to choose a contrasting accessory for a gray product.

How to choose a women's vest

Women's knitted vests (photos show complex outfits) can be worn to the office, to college, and even to an official reception. This accessory emphasizes the advantages of a woman's figure and hides her flaws. The selection criteria can be seen in the table given below.

How to choose the right vest:

Type of product, what to wear with it	What features of the figure does it hide?	Length	Cut	Material texture
loose vest, worn without buttoning, over blouses and T-shirts	will hide wide hips, waist	product whose length is below the knees is suitable tall girls; for short ones - maximum length to the knees	straight silhouette	fine wool and coarse thread will visually give fullness to the figure; It is better to knit with a simple stockinette stitch made of fine wool
a short vest can be worn buttoned or, conversely, unbuttoned, at the waist, under the vest, wide belt	will make your large breasts invisible and visually lengthen your figure	can be up to the waist or reach mid-thigh	fitted, neckline - round, shallow or V-shaped	soft wool
fitted vest, short or long	will cover thick thighs	to mid-thigh or knee	has a flared hem, short - with shelves above the waist	light openwork knitting, refined patterns
loose vest with a wide belt without fasteners or pockets	will hide all figure imperfections	to mid-thigh	asymmetrical hem, V-neck	smooth fabric made of thin threads, fine pattern
granny square model	suitable for girls with any figure	from the knees	free	squares made of acrylic, fine wool of various colors, with different patterns
voluminous knit vests	for slim people: the product makes your figure heavier	long or short	loose or fitted fit	thin threads, patterns: braids, plaits, complex ornaments

Preparation of materials and tools

If earlier knitters had homemade knitting needles and homespun yarn in their hands, today the available line of tools is quite long.

The list of equipment for a beginning knitter may be as follows:

Yarn is required for knitting.

The range of yarn produced by modern industry is very large:

synthetic yarn;
natural fibers (angora, mohair, lurex);
synthetic yarn, which contains several types of unnatural fibers.

Before choosing yarn, you need to think about what time the vest will be worn. For warm products, it is better to take mohair threads; for the summer version, synthetic yarn is suitable.

How to knit a women's vest

Women's knitted vests with knitting needles (the photo shows how to complete the model step by step) are easy to knit with your own hands, but first you need to study the pattern of the model and then assemble the tools.

For knitting you need:

Spokes: If you are planning a thin sleeveless vest, you need thin knitting needles. The thicker the yarn for the product, the thicker the knitting needles.
Yarn: The yarn number is usually indicated in the model description, but the knitter chooses the color herself.
Knitting pattern: Needed all the time, so it’s best to make a large, clear copy.

To ensure that your hand-knitted product never ceases to please, you need to listen to the advice of experienced knitters:

during the knitting process, you need to monitor the tightness of the knitting and avoid increasing the number of loops;
You definitely need to knit a sample that will help you calculate the knitting density and the number of loops;
for those who are knitting their first sleeveless vest, it is better to choose a simple pattern, and experienced knitters can experiment by connecting threads different color and knitting complex patterns;
a product made in a single piece will be warmer than one that has a clasp;
a ready-made vest made of fine yarn, it is better to wash it by hand, do not twist it, but wring it out;
The finished product must be sewn in a certain sequence: first, the seams on the shoulders, then on the sides;
After the vest is sewn, you can tie the neckline. In order for the plank to come out neat, you should not take the edge loops, but those that were a row earlier;
you will have to ensure that the number of loops along the armhole is the same on all sides.

Classic knitted vest

A classic knitted vest is a universal item that makes any woman visually slimmer. An elongated model with a hood will not keep you warm in cool weather. A vest with large buttons and a leather belt will add style to your look.

Descriptions and knitting patterns for various patterns can be found on the Internet. Knitting pattern for a classic long vest:

For a size 48 product you will need:

500 g of yarn 300 g of polyester, 200 g of acrylic yarn, metallic terracotta color;
circular knitting needles No. 4 and hook No. 3;
stitching needle.
Knitting pattern: - stockinette stitch (you should knit carefully, because you should not confuse the front and back loops);
garter stitch - knit all rows with knit stitches;
The model can be made in separate strips of acrylic and fluffy yarn.

The product execution process will be as follows:

cast on 10 loops from mohair wool, knit a strip with stockinette stitch, the length of which will be 65 cm (8 parts will be required);
Taking terracotta-colored yarn, cast on 10 loops and, using garter stitch, make 4 strips, 65 cm long;
1 piece 56 cm long, 2 pieces 40 cm long are knitted from the same yarn.

The connected parts are sewn together according to the pattern; work should begin with the shoulder seams.

To prevent the bottom of the product from curling, it should be tied with a patent using terracotta-colored yarn.

To do this, you need to cast on the edge loops on the knitting needles and knit a strip of 7 cm. The neckline, shelves, armhole can be crocheted - 2 single crochets.

Knitted vest with braids

Women's knitted vests (the photo shows a model with braids, whose shoulders are slightly dropped), looks very elegant.

Using this pattern, you can knit a product of any size. The diagram for the model is given below:

Necessary:

50 g of white wool yarn;
ordinary knitting needles No. 3.5 and 4;
knitting needles with fishing line No. 3.5, long and short;
1 free knitting needle;
hook No. 4;
a few buttons.

Patterns:

A separate issue is knitting the main pattern - braids. The pattern can be small or large, the weave can be located side by side and have different lengths. Even if the knitter makes just one braid, the item will look original.

Braid knitting pattern and symbols

Face loop;

10 loops should be crossed to the left side (5 loops are removed unknitted onto the knitting needle. The next 5 loops are knitted in the front way, then the loops from the free knitting needle are also knitted).

10 loops are crossed to the right and knitted in the manner described above.

You can also distinguish the rows in the diagram by counting: to the left - odd rows are the front rows, in the opposite direction - even rows are the purl rows. The width of the piece is 20 sets, after 12 rows are knitted, the pattern is repeated. The braid can be of any length. By doing classic version weaving is done through 5 rows.

Sleeveless vest

The sleeveless vest is universal in a woman's wardrobe. Modern fashion offers many models - sports, with a hood, long or short versions. Some models are similar to sweaters, but without sleeves, some are like a summer sweater. Combining a sleeveless vest with different objects wardrobe, you can have a new set every day.

For knitting you will need:

100% merino yarn 8-9 skeins (100 g per skein);
knitting needles of two sizes - 4 mm and 5 mm; markers.

The product is made in stockinette stitch and garter stitch from the right sleeve to the left. To calculate the knitting density, you need to knit a small square, the side of which is 10 cm. You should calculate how many loops are in 1 cm. Multiply the resulting number by the size of the hip circumference and divide by 2.

Knitting pattern for a sleeveless vest

To make the product look more modern, you can make the back longer than the shelves.

Long women's vest with hood

A long women's vest with a hood is a product that can combine various knitting methods. This outfit is suitable for young people as it has a sporty look and is best worn with leggings or skinny trousers. Using the pattern given below, you can knit a vest from sizes 36 to 42.

Knitting pattern for a vest with a hood

Necessary:

800 g of blue thread (60% wool, 40% possum wool) and a skein of elastic thread;
knitting needles – 4, 5 mm and 5.5 mm.

The knitting process will be as follows:

The back is covered with blue thread, folded in half.

you need to cast on 81 loops and knit an elastic band, 5 cm wide;
knit 2 rows with stockinette stitch, adding 1 loop;
the next stage is knitting a pattern from braids;
after 56 are knitted, bind off the loops for the armholes (72 loops should remain);
after the length of the back reaches 75.5 cm, the loops for bevels on the shoulders are closed, first – 9 stitches, then – 16;
At the same time, the loops on the neck are decreased by 20 loops each, and the row is closed.

The left and right fronts are knitted symmetrically.

To complete the left shelf you need:

cast on 47 loops, go 5 cm for the bar;
add 1 loop;
knitting of the pattern begins;
compare the product with the first part - the back and make an armhole;
after the length of the shelf reaches 66 cm, a cutout is made for the neckline and a bevel for the shoulder, as on the back.

The hood is also knitted with a braid pattern:

47 loops are cast on and the pattern is made;
add 5 loops to the back;
having knitted 22 cm, match it with the pattern and put the part aside, knit the second half;
cut the loops on each half so that the piece becomes round;
parts of the hood are sewn together.

If all the details are completed, then the product can be sewn:

the hood is stitched to the neck and tied with an elastic band, casting the edge loops of the shelves onto circular knitting needles;
side seams are made;
The entire product is tied with an elastic band and the loops are closed.

Women's grass vest

A grass vest with short sleeves is the perfect casual accessory for a cold day.

Knitting pattern:

You should prepare:

2 skeins of blue yarn (main thread) and 7 skeins of white - “grass” (additional thread);
circular knitting needles (10 mm);
markers and an additional knitting needle.

The sleeveless vest is knitted simply: a continuous piece of fabric is knitted up to the armholes. The diagram shows 3 parts, but the left shelf will be exactly the same. Two threads are used to create multi-colored stripes.

The knitting process is carried out according to the following plan:

the main thread is folded into the widow and 72 loops are cast on and the 1st and 2nd rows are tied with facial loops with the introduction of an additional thread;
from rows 3 to 6, the main yarn is knitted with knit stitches;
the next rows - from 7 to 10 - with an additional thread; this alternation occurs until the back length is 35 cm;
the number of loops is reduced on both sides - for the armhole;
By changing the main and additional threads, the left and right fronts are knitted with bevels for the armhole and sleeves.

After the rows are closed, the product is sewn together, starting from the shoulders, then along the sides, and the sleeves are sewn on.

Openwork vest

Women's knitted vests (the photo shows many options knitted with an openwork pattern) always look festive. If you knit something from cashmere or wool, it will not only complement your look, but will also warm you up on a frosty winter day. It will go well with sports or classic clothes.

Knitting pattern for an openwork vest

For a size 48 product you need:

500 g of Arina yarn, which consists of acrylic and wool in equal quantities (the color of the yarn can be any);
knitting needles and hook No. 5;
buttons.

Knitting density: in a square with a side of 10 cm (20 rows), 16 loops are placed in one row. The diagram shows how the openwork pattern is knitted, but only the front rows; in the purl rows, the loops are knitted purlwise. A hook is used to make air loops of single crochets and double crochets.

Knitting description:

The right and left shelves and the back are seamlessly knitted. To do this, cast on 85 loops and 2 edge loops and knit the fabric.
Then the loops are divided - 23 for the left and right front, 29 for the back.
Knitting the right front
12 rows are worked in an openwork pattern (according to the diagram);
in the 105th row (from the beginning of knitting) edge loops are added (there will be 37 loops on the knitting needles);
the pattern element is knitted and the number of loops is reduced by 3;
in the new row these loops are picked up again;
on the 144th row the loops of the right shelf are closed.
The left shelf is performed like the right one.

Assembling the vest goes like this:

side seams are made. The neck, shelves and bottom of the product are crocheted;
the shelves are overlapped and stitched together;
a button is sewn on.

Waistcoat with waffle patterns

Women's knitted vests look charming. The photo represents a line of products with a waffle pattern.

To implement the option you like, you need to take:

700 g of dark red (wine-colored) yarn: “Ascot” melange thread is suitable, which contains more than half wool, as well as viscose, alpaca;
300 threads of pinkish color “Silkhair”, in which mohair is combined with silk;
knitting needles No. 5 and 6.5, circular knitting needles.
The product is knitted with double thread.

To knit a vest, you can use the following pattern:

There are several patterns you need to master:

the edge of the vest is knitted in a chain: the 1st loop is knit, the last loop is purl;
elastic band: purl 2 loops, knit 2 loops;
facial surface - how the loops are visible;
garter stitch - only knit stitches on the front side;
The waffle pattern is knitted according to the pattern, beginning with the first arrow, then 4 repetitions.

Description of knitting product:

back;
Using knitting needles No. 5, cast on 98 loops and knit 6 cm (12 rows) with an elastic band;
switching to knitting needles of a different number, knit 2 rows in satin stitch and switch to knitting 49 cm, mark the beginning of the armholes with markers;
after completing 19 rows, cast off 5 stitches;
then gradually close the loops through the row.

Shelves: first the left shelf is made, then the right.

The knitting pattern is the same:

cast on 49 loops;
tie the strap with an elastic band;
switch to other knitting needles of a different number,
knit 2 rows in satin stitch, add stitches and knit in a pattern
after 58 rows have been completed from the bar, make a bevel for the neckline: bind off 1 loop at a time over 16 rows;
The bevel on the right side is performed as on the back.

The pockets can be tied with an elastic band or the same as all other parts.

Vest with geometric shapes

Vest with geometric shapes looks original and resembles a poncho.

Beautiful knitted vests for women. Options in the photo.

To complete it you will need:

dark blue (200 g) and white (100 g) yarn (100% microfiber);
straight and circular knitting needles (it’s better to take No. 3).

Pattern - zigzags

Pattern diagram:

The pattern consists of two parts - A and B, the width of which is 37 loops. It should be knitted in satin stitch. To change the color you need to cross the thread with reverse side pattern. The pattern is repeated several times (from rows 1 to 36). The light pattern is knitted in the same way as the dark one, but the stitches are counted in the opposite way. Product diagram:

To complete the back, cast on 80 stitches (blue thread).

knit 1 cm in purl stitch;
go to the front stitch and knit 14 rows with pattern A, the last 37 loops with pattern B.
After the pattern is completed, you should knit 84 rows with blue thread, then close the armholes on both sides by decreasing the loops in each row;
after 45 cm the neckline is completed: 24 loops are closed,
knitting continues on each side of the neckline. Gradually the row closes.

The front part is made like the back, but the cutout is made deeper.

The vest is assembled in the following sequence: first, the shoulders and sides are sewn together. Then you need to knit the neckline and armholes on circular knitting needles. Women's knitted vests have become the most unusual item in a woman's wardrobe. The photo shows popular models that you can make yourself.

Article format: Anna Vinnitskaya

Video about knitting women's vests

Women's vests and sleeveless vests, knitted with knitting needles:

The vest is a common element of women's clothing. They wear it all year round, only the material is different for each season. A knitted vest will be a real decoration for both your everyday wardrobe and your holiday outfit.

The choice of thread and pattern for such a unique piece will depend on the time you plan to wear it.

Knitted vest

Every woman should have this unique wardrobe item. You can buy it, sew it from different materials, and also knit from different threads. The vest can be worn at any time of the year, complete with different clothes:

a classic vest model can be worn over a blouse to create a business option;
a chic knitted vest will complement not only an evening outfit, but also a wedding one;
fashionistas love to wear a short bolero vest;
a vest with buttons is the favorite clothing of older women.

A knitted product can have buttons, a zipper, or no fastener at all. This will depend on the purpose of the product, and on the clothes with which you will wear it.

Preparing for work

If you are determined to knit this unique item, then first you need to decide on the model, choose the threads and select the knitting needles for them. From a large assortment of patterns, choose the most beautiful and not very complicated one for yourself, and only then start working.

The main thing in work is patience, because you won’t be able to get the finished product very quickly.

To make a knitted product your size, you need to prepare a paper pattern. From the selected threads you need to knit a sample pattern and calculate the number of loops in one centimeter from it. Knowing your dimensions, it will be very easy to calculate the required number of loops for the product.

The vest can be knitted both from the bottom and from the top - it will depend on the chosen model.

Even a beginner can knit this model. Only one stitch is used in this work - garter stitch:

The knitting is not complicated, and on thick threads it looks great. Since this product is the simplest, it is very easy to knit.

Back.

Loops are cast on the knitting needles and a straight fabric is knitted. There is no need to make any decreases or increases. The height of the canvas will depend on the selected length of the product.

When the canvas reaches a certain height, all the loops can be closed.

Before

The front part of the product consists of two halves. There are no button and loop strips needed - the vest does not fasten. Each front half is knitted separately. To work, you need to pick up half the back stitches and knit a straight fabric in garter stitch to the intended neckline.

To design the neckline, you need to knit two loops together in the front row. The number of reductions will depend on:

knitting density;
the beginning of the location of the cutout.

The lower the neckline starts, the less often you will need to make decreases to make the neck shape beautiful.

When the width of the knitting corresponds to the width of the shoulder, and the length is the same as that of the back, the shoulder loops can be closed.

The second half of the shelf is knitted in the same way.

Assembly.

The resulting shoulder on the front shelf must be sewn to the back shoulder. Then, leaving enough space for the armhole, the side of the vest is sewn.

The second side is sewn like the first. The product is ready.

Even though this product is knitted with the simplest knitting, it looks great with both a turtleneck and an office blouse. Such a thing, knitted with large threads, will be stylish. Beautiful knitted women's vests and sleeveless vests can be found on the Internet. If you cannot knit the product yourself, then you can order the selected model from a trusted craftsman.

If such a vest seems rustic to you, then you can come up with some kind of decoration for it. Having such a thing in your wardrobe, you can knit a similar one, only in a more complex pattern, with braids.

A wonderful addition to a spring look would be the same thing, knitted from threads of different colors. A scarf pattern is also used for it.

Long vest

This model is similar to a tunic, it can be worn with a belt, and has slits on the sides. Instead of elastic, garter stitch is knitted along the bottom of the product. The main pattern will be the stockinette stitch.

Since the model is elongated, you need to make a pattern, which will be used to calculate the decrease in loops at the waist, and then their addition. Even a novice master can handle the job.

Back.

The required number of stitches is cast on the knitting needles and 8–10 rows are knitted in garter stitch. After this, the work continues in stockinette stitch, and the first and last 4 stitches in each row are knitted in garter stitch. At a height of 18 cm, garter stitch is knitted like the main fabric - in stockinette stitch. 2 cm after this, you need to start making decreases to emphasize the waistline. Calculations are made according to your pattern.

When the part reaches 40 cm, you need to add loops to the initial number. To make the transition smooth, this should be done every 3–4 cm, 1 loop at a time.

At a height of 52–55 cm it is necessary to mark the armhole. To do this, in two rows you need to knit the first and last 9–11 loops in a row with garter stitch. Next, you need to close 3-5 loops on each side for the armhole. The pattern continues: on the knitting needles there are 6 garter stitch stitches on each side and in stockinette stitch.

To make the armhole beautiful, decreases need to be done another 4-10 times, 1 stitch in every second row. Only the shawl pattern is knitted in full size, and after it 2 loops are knitted together with the front one on each side.

When the product reaches 60–75 cm, you need to increase it 5 times, but only 1 loop on each side on the stockinette stitch.

You should also decorate the back neckline with a scarf pattern. To do this, at a height of 68–78 cm, you need to knit 4 rows of average 40–45 loops with this pattern. After this, you need to close the middle 20-25 loops for the neck. Work continues on knitting needles: 6 garter stitches, stockinette stitch, 8-10 garter stitches. The part was divided into two arms. Continue decreasing for a beautiful neckline. In every second row, you need to decrease the stitches in knit stitch from the neck side. The number of loops will depend on your pattern.

When the shoulder width of the piece is the same as on the pattern, and the product reaches the desired length, the shoulder loops can be closed.

Knitting before.

Before the neckline, the piece is knitted similarly to the back. The toe neckline begins at a height of 38–42 cm from the beginning of knitting. For it, you first need to knit 12 rows with a garter pattern on the middle 16 loops. Next, the part needs to be divided in half in the middle, and each half must be finished separately.

To make the V-neck beautiful, you need to decrease 1 loop every 2–3 cm. As on the back, decreases are made after 8 stitches of the garter pattern. In total you need to make 12–14 decreases.

When the product reaches the desired height, the shoulder loops can be closed.

Assembly.

Finished parts of the product need to be washed or steamed. Next, the shoulder seams are sewn, then the side seams, but not all the way to the bottom. You need to leave 18 cm at the bottom for the cuts.

A girl dressed in boho style will always stand out from the crowd. Her image breathes freedom, originality and airiness. Products in this style become a real salvation for overweight ladies, as they are loose, long or multi-layered. These are the things that will help hide all the imperfections of your figure and give it smooth and feminine lines.

For a creative vest, it is advisable to choose openwork, but non-voluminous patterns, jacquard, stockinette stitch, relief elastic or a fantasy pattern. As decoration you can use fringe, ruffles, frills, applique, braid or tassels. But you need to remember one rule: accents cannot be placed in problem areas.

Women's sleeveless knitted vests with a description in the boho style must be loose. They may not always have straight edges - that's the beauty of it.

There are many options for this modern product on the Internet. It is simply impossible to single out one and make a description of it. They are all unique. Select your product option and find a description or a detailed master class for it.

By knitting such a vest for yourself, you will feel your rebirth.

This model is very interesting with its shape. It is not difficult to knit, just knit it crosswise, starting from the left front. This item will go well with sportswear and classic style.

In this work we use:

garter stitch;
simple openwork.

Women's knitted vest with knitting pattern and description is presented only for front rows. In purl rows, all stitches and yarn overs are purl. The number of loops in the main pattern is a multiple of 10+5+2 chrome.

Progress.

To get the bar as shown in the picture, you need to start knitting with a garter pattern. Then the product is knitted with the main pattern. After 44 cm, you need to knit the placket again and then make an armhole. Please note that it is not in the middle, but shifted upward. Using your measurements, calculate how many loops you need to close for the armhole. In the next row, you need to cast on the same number of loops and knit the bar again.

Once you understand the proposed pattern and substitute your measurements into it, you will be able to knit a unique item.

If you choose natural threads for the product, you need to remember that the product will shrink during wear, so you need to knit the model a couple of sizes larger.

It is better to knit a vest for the winter with woolen or half-woolen threads. And for the summer model, linen and cotton are suitable.

To get an amazing thing in boho style, you need to decorate it with original details. Hand made art will help with this.

Knitted vests with patterns can be found on the Internet. In addition to the description of the pattern, you can watch a detailed master class on knitting the product.

Attention, TODAY only!

Knitted vests and sleeveless vests have firmly established themselves in the stylish wardrobes of real fashionistas. Classic styles, fashionable and original models, round or V-neck – there are many models. Sleeveless vests can be worn as an addition to your everyday look, or as a key element of your office outfit.

Women's grass vest - a detailed description for beginners

Things knitted from such yarn are very original. Ladies of any size can wear them. But, given the texture of the yarn, it is better not to use it for overweight women. And for slender girls, grass models are just a godsend! Knitting them does not require highly skilled knitter, since the patterns used are very simple.

Sizes: S; M; L; XL.

We will need:

“grass” type yarn, 100% synthetic, (100g per 18m), brown color – 800; 900; 1000; 1100g;
regular yarn, melange, grass color, containing 60% acrylic, 40% polyamide (50g per 80m) – 350; 350; 400; 450g;
knitting needles No. 4.5 and No. 8;
hook No. 4.5.

Patterns:

elastic band: 2 knits. X 2 purl. – knit with needles No. 4.5;
persons smooth surface: in faces. rows - knit stitches, purl stitches. rows - purl. Knit with needles No. 8.

Alternating stripes: 2 rows with grass yarn / 2 rows with regular yarn.

Technique for performing decreases

In the process of work, we will need to make decreases of 1 p., retreating by 2 p. from the edge. The algorithm is as follows: at the beginning of the river. – we knit 2 p., then from 2 p. we knit 1 p.; at the end of the river – when we have 4 stitches left on the knitting needle, we knit 1 broach (remove 1 st. knit, 1 p., pull it through the removed one), 2 p.
Density: face. smooth sp. No8 10p. for 13r. equal to 10 cm by 10 cm.

Description - how to knit a vest with your own hands

Back

We start knitting the pattern with set 68; 74; 80; 88p. smooth yarn with knitting needles No. 4.5. We knit 18 rubles. elastic bands (about 7cm). In the last row we make decreases of 20 at equal intervals; 22; 24; 26p. That leaves us with 48; 52; 56; 62p. Next - persons. satin stitch using No. 8 knitting needles with alternating stripes of regular yarn and “grass” (see explanation above). In every 4th row on both sides, not reaching 2 sts to the edge, add 1 st. three times, then twice more, 1 p. in every 2nd row; twice 1p. in every 6th p., three times 1 p. in every 4th r.; 2 times 1 p. in every 6th r., 3 r. 1 p. in every 4th r.; 2 rub. 1 p. in every 6th r., 3 r. 1 p. in every 4th r.

We continue knitting sleeveless vests for women using the existing 58; 62; 66; 72p. After 70; 72; 72; 74 rub. (this is about 47; 48; 48; 49 cm) from the beginning of work, we reduce the shoulder bevels on the sides of the p., retreating 2 p. from the edge. Decrease pattern: 5 times 1 p. in every 4th p., 5 times 1 p. in every 2nd row, every other row - 1 time in 5 stitches, every other row - 1 time in 6 stitches; 5 times 1p. in every 4th r., 6 r. 1 p. in every 2nd row, every other row 1 time in 5 stitches, every other row 1 time in 6 stitches; 5 times 1p. in every 4th p., 7 times 1 p. in every 2nd row, 2 times 6 p. in every 2nd r.; 5 times 1p. in every 4th; 8 times 1 p. in every 2nd r.; then in every 2nd r. 1 time 6 p. and 1 time 7p.

In the series of performing the last lateral decreases for rolling out the closed. central 12; 14; 14; 16p. and finish the resulting sides separately. To round the rollout from its inner side, close it 1 time in 2 stitches.

Before

Left half front of sleeveless vest

We cast on with knitting needles No. 8 13; 15; 17; 20p. yarn from "grass". We knit faces. satin stitch, alternating stripes. By right side details we make increases, as on the back. On the left side, retreating 2p. from the edge, add 4 times 1 p. in every 2nd p., 3 times 1 p. in every 4th r. We get 25; 27; 29; 32p., continue knitting evenly on them. After 46; 48; 48; 50 rub. (this is about 35; 36; 36; 37 cm from the beginning of the work; for rolling out, we decrease along the left side of the loop, retreating 2 points from the edge.

The scheme is as follows: 4 times 1 p. in every 8th r.; 3 times 1 p. in every 6th p., 2 times 1 p. in every 8th row; 3 times 1 p. in every 6th row, 2 times 1 p. in every 8th row; 3 times 1 p. in every 6th row, 3 times 1 p. in every 8th row. For the shoulder bevels, we perform decreases using the description for the back of the sleeveless vest. Closed n. at the height of the back.

Right half front of sleeveless vest

Strap of the right half of the front and 1⁄2 rollout of the back neck

We cast on with regular yarn using knitting needles No. 4.5 190; 200; 210; 220p. and knit an elastic band. In 20r. (this is 9cm) from the beginning we put a stitch on the left side in every 2nd r. 1 time 160 p., 2 times 7 p., 2 times 8 p.; 1 time 168p. 4 times 8 p.; 1 time in 176 p., 2 times in 8 p., 2 times in 9 p.; 1 time in 184 p., 4 times in 9 p. Knit one row on all stitches, closed. All P.

Plank of the left half of the front and 1⁄2 rollout of the back neck

Performed in a mirror manner to the previous part.

Assembly

We sew the shoulders. We sew the strips along the bottom edge, then along the front halves to the center of the rollout on the back. We join the edges of the planks and sew them with a knitted seam. We sew the sides, leaving gaps for the armholes - 23cm each. We crochet the edges of the armholes with 1 row of connections. columns. For the ties, we collect a chain of air stitches 40 cm long. Then we knit 1 connection. stitch in the 2nd stitch of the chain and in each next stitch. Sew the strings to the back. side of the slats, retreating 9 cm from the beginning of the neck rollout.

The next model of a sleeveless vest for women is knitted from yarn with a pronounced “fur” effect. A large percentage of mohair in the thread makes the sleeveless vest warm enough to be worn instead of a jacket. The range of sizes allows you to knit a vest for graceful and plump women.

Stylish azure vest with knitting needles: video MK

Sleeveless vest knitted from bouclé yarn

Sizes: S; M; L; XL; XXL; XXXL.

We will need:

boucle yarn, composed of 94% mohair, 6% polyester (50g per 50m) – 550; 600; 650; 700; 750; 800g;
knitting needles No. 7.

Patterns:

garter stitch: knit all stitches in all rows.

Density: 10p. for 20r. equal to 10 cm by 10 cm.

How to knit shortened rows K1– explanation for beginners:

1r. and 2p.: tie 26; 28; thirty; 32; 36; 40p., turn the fabric. Knit a purl row;
3 rub. and 4p.: knit 24; 26; 28; thirty; 34; 38p., turn the fabric. Knit a purl row;
5 rub. and 6p.: tie 22; 24; 26; 28; 32; 36p., turn the fabric. Knit purl p.

Next, we knit straight and reverse rows on all loops. We got 10 each; eleven; 12; 13; 15; 17 pairs of rows (straight + reverse) performed on the outside and one pair of rows on the inside of the sleeveless vest.

The rounded side on the outside has a length of 30; 33; 36; 39; 45; 51cm, and on the inside - 2cm.

How to knit shortened rows K2– explanation for beginners:

Short rows are knitted to round the front edge. The scheme is like this:
1r. and 2p.: tie 26; 27; 27; 27; 28; 30p., turn the fabric. Knit a purl row;
3 rub. and 4p.: knit 24; 25; 25; 25; 264; 28p., turn the fabric. Knit a purl row;
5 rub. and 6p.: tie 22; 23; 23; 23; 24; 26p., turn the fabric. Knit purl p.

We continue, repeating this simple algorithm: each time we knit by 2p. less until you get 10 stitches on the left needle. On these 10p. We knit the straight and reverse rows once.

Next, we knit straight and reverse rows on all loops. We got 10 each; 10; 10; 10; eleven; 12 pairs of rows (straight + reverse) performed on the outside and one pair of rows on the inside of the sleeveless vest.
Repeat three times, starting from 1st.

The rounded side on the outside has a length of 30; thirty; thirty; thirty; 33; 36cm, and on the inside - 2cm.

How to knit a vest with fur yarn - diagram and description for beginners

Vest back for graceful and plump women

We cast on fur yarn 36; 40; 44; 50; 56; 62p. and knit a scarf pattern at 6cm height. Next row on both sides add 1 stitch. We repeat the increase after 6cm. We got 40; 44; 48; 54; 60; 66p. 20cm from the start of knitting for closed armholes. at the beginning of every day 3p on both sides. 0; 0; 1; 1; 1; 1 time, 2 p. 1; 1; 0; 1; 2; 3 times, 1 p. 0; 1; 2; 2; 3; 3 times. We end up with 36 in total; 38; 38; 40; 40; 42p.

At model height 35; 36; 37; 39; 40; 41cm closed central 8; 8; 8; 10; 10; 10p. to roll out the neck and finish the resulting parts separately. Closed along the inner edge of the rollout. 1 p. next row. There are 13 left on each shoulder; 14; 14; 14; 14; 15p. At altitude 37; 38; 39; 41; 42; 43cm closed all the loops.

The right half of the front of the vest for graceful and plump women

All measurements are taken on the short side of the part!

We cast on fur yarn 28; thirty; 32; 34; 38; 42p. We knit a shawl pattern for 16; 18; 20; 23; 26; 29cm height. Then we proceed to the shortened rows of K1 for faces. side - see description above.
After 3 repetitions of shortened rows, we continue to knit garter stitch on all stitches.

In the future, we will take measurements from here. After 6 cm and after 12 cm we add 1 stitch. on the short side. We have 30; 32; 34; 36; 40; 44p. For an armhole at a height of 20cm closed. loops according to the description of the back at the beginning of each row. from the short side. We have 28; 29; 29; 29; thirty; 32p.

We continue to knit a shawl pattern with fur yarn up to a height of 35; 36; 37; 39; 40; 41cm.

Next, we begin to perform shortened rows K2. Having completed knitting all the shortened rows, we obtain the height of the part 37; 38; 39; 41; 42; 43cm on the short side. Next R. on the wrong side of the closed initial 13; 14; 14; 14; 14; 15p. under the shoulder. The remaining 15; 15; 15; 15; 16; 17p. knit with fur yarn to a height of 5; 5; 5; 6; 6; 6 cm with a scarf pattern (measured from the shoulder) - this will be the collar. Closed P.

The left half of the front of the vest for graceful and plump women

It is made using fur yarn in a mirror image of the previous part.

Assembly

We sew the shoulders. We make the side seams. Using a knitted seam, we connect the halves of the collar and sew it to the main part.

Vest made from sectional yarn: video master class

Long women's vest with hood

A very practical clothing option for the off-season. An elongated vest with a hood is ideal to wear on autumn days with changeable weather. With such a sleeveless vest, you are always protected from sudden cold snaps. It can be knitted from mohair or wool with the addition of synthetics.

A special feature of this simple model is the use of large knitting. The fishbone pattern may seem difficult for beginning knitters. In fact, once you figure it out, you will understand that knitting this pattern with your own hands is not difficult.

Sizes: 38/40.

For this model we need:

yarn containing 50% wool, 50% acrylic (100g per 240m) – 1100g;
knitting needles No. 6.

Patterns:

persons smooth surface: in faces. rows - knit stitches, purl stitches. rows - purl;
fishbone pattern:
1r.: 1kr., right sp. insert into two loops, pull out k1, remove the 1st of the knitted stitches, leaving the 2nd on the left knitting needle. Through the remaining st and the next one we again thread the right sp., pull out 1 l., remove the first of the knitted sts, leaving the second loop on the left knitting needle. We continue like this until the end of the row;
2p.: according to the principle of the first row, only with purl loops.
For beginner knitters - see video

We knit a long women's vest with a hood - detailed description

Front sleeveless vest with hood

We cast on with knitting needles 61 sts. and perform 40cm of coarse fishbone knitting. Next row on the outside under the closed armhole. in even p. 3p., 2p., 1p.
At a height of 55cm internally. edge for rolling out closed in even p. 4p., 3p., 2p., and 3 times 1p. 65cm closed all loops.

Knit the second part of the front in a mirror manner.

Back of sleeveless vest with hood

We cast on with knitting needles 111 sts. and perform 40cm of coarse fishbone knitting. Next row on the sides under the armhole closed. in even p. 3p., 2p., 1p. 65cm closed all loops.

Hood

We cast on with knitting needles 99 sts. and perform 28cm of large fishbone knitting. Closed p. For the strap along the front edge of the hood, we lift the loops evenly with our hands and knit 5p. persons satin stitch Then - 1 rub. purl stitches (this will be the fold line). We knit 5 rubles again. persons satin stitch Closed loops. We fold the strip outward along the fold line and hem it. We make the same strips along the edges of the armholes, the front edges of the shelves and the bottom of the model with a hood.

Openwork long women's vest

Summer vest models look very stylish. They are fashionable to wear with trousers, tight skirts, even shorts! They are suitable not only for thin, but also for plump beauties: while hiding the flaws of the figure, such models will favorably emphasize its advantages. An openwork elongated version of the vest can be worn even for beach walks - your look will be very romantic with it!

Sizes: 38-40; 46-48.

To knit an openwork vest with your own hands we will need:
yarn containing 40% viscose, 30% cotton, 20% linen, 10% polyamide (50g per 125m) – 500; 600g;
knitting needles No. 4.5;
hook No.4.

Patterns:

openwork pattern A.: performed according to the diagram. The number of points is a multiple of 10 + 1 point + 2 cr. The diagram shows persons. rows. In purl r. Purl all loops and yarn overs. The first and last stitch in the row is the edge stitch. Between them are repetitions of rapport. In height it is knitted once with 1p. 28 rubles each;
openwork pattern B: tie like a knot. Ah, but repeat in height from 29 rubles. 36 rubles each;
openwork pattern C: tie like a knot. Ah, but repeat in height from 37 rubles. 60 rub.

Sequence of patterns: the first pattern is 28 rubles, then 128 rubles. the second pattern, then 52 rubles. third pattern. There are 208 rows in total.

Density: 20.5p. for 24.5 rub. equal to 10 cm by 10 cm.

Description

Back

We dial 113; 133p. and do 1p. facial This row will be purl; we will not take it into account in further calculations. We continue to knit, alternating patterns. Through 156r. (63.5cm); 146 rubles (59.5 cm) on both sides for sleeves 1 time 10 stitches. and include them in the pattern. We have only 133 (153) points. After 194p. (79cm) from the beginning of the close. for the shoulder line on each side 1 time 7; 8 p., then in every second p. 1 time in 7 p., 5 times in 6 p.; 1 time in 8 p., 5 times in 7 p. Through 208r. (85 cm) from the beginning we will have 45; 51p. Of these, central 33; 37p. – neck rollout, the remaining 12; 17p. – shoulders (2x6p.; 7p.).

Left shelf

We dial 63; 73p. and do 1p. facial This row will be purl; we will not take it into account in further calculations. We continue to knit, alternating patterns. We make additions to the sleeve according to the description of the back. In total we have 73; 83p. Through 158r. (64.5 cm) from the bottom of the close. under the rollout bevel on the left side 1 time 1 p., then in every 2nd p. 22; 24 times 1 p. Don't forget to make decreases along the left edge for the shoulder bevel. To do this, we use the description of the back. At the same height as the previous part, closed. 6; 7p. for the shoulder.

Right shelf

We knit as the previous part, only in a mirror way.

Assembly

Sew the shoulders and sides. Sew the sleeves. We crochet the vertical edges of the shelves and the neckline, performing 1 r. connecting posts.

How to knit a vest for any size: video mk

Selection of schemes

30 models of knitted vests and sleeveless vests with photos, diagrams, descriptions and video MK

Knitted vests and sleeveless vests have firmly established themselves in the stylish wardrobes of real fashionistas. Classic styles, fashionable and original models, round or V-neck - there are many models. Sleeveless vests can be worn as an addition to your everyday look, or as a key element of your office outfit.

Women's grass vest - a detailed description for beginners

Sizes: S; M; L; XL.

We will need:

grass type yarn, 100% synthetic, (100g per 18m), brown - 800; 900; 1000; 1100g;
regular yarn, melange, grass color, composed of 60% acrylic, 40% polyamide (50g per 80m) - 350; 350; 400; 450g;
knitting needles No. 4.5 and No. 8;
hook No. 4.5.

Patterns:

elastic band: 2 knits. X 2 purl. - knit with needles No. 4.5;
persons smooth surface: in faces. rows - knit stitches, purl stitches. rows - purl. Knit with needles No. 8.

Alternating stripes: 2 rows with grass yarn / 2 rows with regular yarn.

Technique for performing decreases

In the process of work, we will need to make decreases of 1 p., retreating by 2 p. from the edge. The algorithm is as follows: at the beginning of the river. - knit 2 p., then knit 1 p. from 2 p.; at the end of the river - when we have 4 stitches left on the knitting needle, we knit 1 stitch (remove 1 stitch of the front stitch, 1 stitch, pull it through the removed stitch), 2 stitches.
Density: face. smooth sp. No8 10p. for 13r. equal to 10 cm by 10 cm.

Description - how to knit a vest with your own hands

Back

We continue knitting sleeveless vests for women using the existing 58; 62; 66; 72p. After 70; 72; 72; 74 rub. (this is about 47; 48; 48; 49 cm) from the beginning of work, we reduce the shoulder bevels on the sides of the p., retreating 2 p. from the edge. Decrease pattern: 5 times 1 p. in every 4th p., 5 times 1 p. in every 2nd row, every other row - 1 time in 5 p., every other row - 1 time in 6 p.; 5 times 1p. in every 4th r., 6 r. 1 p. in every 2nd row, every other row 1 time in 5 stitches, every other row 1 time in 6 stitches; 5 times 1p. in every 4th p., 7 times 1 p. in every 2nd row, 2 times 6 p. in every 2nd r.; 5 times 1p. in every 4th; 8 times 1 p. in every 2nd r.; then in every 2nd r. 1 time 6 p. and 1 time 7p.