Lace garter. A beautiful and practical DIY bride’s garter – master class. How to sew in a classic style

The garter for stockings has long lost its functional purpose, but as a piquant and seductive element of the wardrobe it has gained unprecedented popularity. It has taken a special place in wedding traditions. Of course, demand immediately gives rise to supply, but after shopping, you may be disappointed by the lack of a model you like or its overpriced price. But a bride’s garter can be done with her own hands in a few hours, and the cost of making it is minimal. In this article you will find some beautiful and simple ideas for creativity.

Important element

Previously, garters were made of leather or durable fabric and were not intended for prying eyes. But the wedding option will be seen not only by the groom, but also by all your guests. After all, the newly-made spouse must throw this wardrobe element at the unmarried half of the men present. Whoever catches it will soon find family happiness. Some versions of this custom insist that the husband must pull the garter off his wife's leg with his teeth. So, you see, this element of the wedding wardrobe should be neat and beautiful.

Master class: how to sew a bride's garter with your own hands

Let's take a closer look at the process of its creation.

What you will need for work:

rubber;
satin and corsage ribbon (necessarily wider than the elastic band);
2 pins;
sewing machine;
glue gun

And here’s what happens if you sew a satin ribbon to the edge of the lace:

How to make a bride's garter with your own hands in 10 minutes?

In order to make such beauty, you don’t even need a machine.

What you need to buy:

stretch lace of the desired width;
a decorative element made of rhinestones (or take a regular wedding necklace and remove the extra links with wire cutters);
matching thread and needle.

To begin, cut a piece of lace so that it fits snugly around your leg. Do not squeeze the vessels so as not to impair blood circulation, but also do not forget that the rhinestones are heavy and will pull the structure down.
Sew the ends of the lace from the wrong side.
Turn the product inside out and lay it out so that the seam is at the back in the middle.
Sew on a decorative element.

The sparkling garter is ready.

How can you diversify this idea?

For example, this bride’s handmade garter is decorated with a large beaded decorative element. Lovely, isn't it? And the work is done exactly the same.

If desired, you can add a frame of sewn or glued round rhinestones around the voluminous decoration.

A simple solution

Here is another beautiful bridal garter. Making it with your own hands is not so difficult, and the process itself will not take much time and money.

If you have an average foot, then, most likely, lace elastic headbands will fit perfectly on it. Ready-made chiffon flowers and airy feathers will complement delicate lace.

A thin elastic bandage can be transformed with pearls and rhinestones. To ensure they lay beautifully, glue them to a tulle base to match the fabric, and only then sew the assembled composition to the garter.

Experiment with lace and trim colors to create your own perfect garter.

A wedding is the most beautiful and desired holiday in the life of every girl. Since childhood, many of us have fantasized about what a white dress would be like, a bouquet of roses or peonies, and what a wedding cake would be like. Preparing for a wedding takes a lot of time, so it is very important to remember every detail and keep a to-do and shopping list. The main thing is not to forget about a very important detail, namely the garter. This is a small indispensable attribute for any bride. Nowadays it is customary to wear two such accessories, one for throwing to the groom’s unmarried friends, and the second for the first wedding night, after which this garter becomes a real amulet of the family. It is best to sew garters yourself, according to your size and preferences. Thanks to this master class, you will learn how to sew the most beautiful bride's garters with your own hands.

Double option

This option differs in that it consists of two parts: one garter will be wide, and the second will be thin.

To make a double garter you will need:

2 meters of thin lace in a beige shade (width 5 cm);
meter of opaque milky lace (width 5 cm);
two meters of peach-colored satin ribbon (width 5 cm);
1.5 m of narrow lilac ribbon;
0.5 m of white tape;
0.5 m cream ribbon;
meter of elastic band 2 cm wide;
beads;
pin;
scissors.

The first step is to make the garter that the newlyweds keep. To do this, you need to take thin lace, cut a piece 90 cm long, and sew a thin lilac ribbon in the middle. This should be the right side of the garter. Then take a wide peach ribbon, fold it in half, and then thread an elastic band into it. From the wrong side, place it in the center of the previous workpiece and sew the edges of the garter together so that it looks like a ring. Distribute the folds around the entire circumference. The garter for the newlyweds is ready.

Now it's time to start the second garter. You should take a wide satin ribbon in peach color and fold it in half. Sew lace along each edge - milky opaque at the top, thin beige at the bottom. Insert an elastic band inside the ribbon and sew the edges into a ring. The base of the second garter is ready.

All that remains is to decorate our products. In a large garter, thread a thin lilac ribbon through the holes in the lace, pull the ribbon into a ring, and tie the ends into a bow. Make another small bow from a thin cream ribbon and decorate it with a bead in the center. Glue a small bow to the lace blank with a ribbon. Sew the finished decoration to the garter. Decorate a narrow garter with a white bow. An original wedding accessory, made without a machine, is ready!

Snow white roses

To make a garter decorated with roses from a satin ribbon, you will need:

satin ribbon (width 5 cm, length - 65 cm);
satin fabric 20 x 20 cm;
lace ribbon (width 7-10 cm, length - 65 cm);
a narrow strip of thin lace (0.5 cm);
0.5 m of linen elastic;
decorative elements;
pearl paper;
a sheet of stationery paper;
needle;
threads to match the fabric;
pin;
scissors;
sewing machine;
candle.

On a piece of paper, outline the shape of the petals for future flowers. Transfer the pattern to the fabric and cut along the lines.

Next, you need to light a candle and process the edges of the petals over its flame. While the fabric is heating up, use your fingers to stretch the pieces in different directions and give them a wavy shape. Then collect the flowers from the petals and connect them to each other with small stitches. Decorate the middle of each flower with a bead. Sew a small strip of narrow lace ribbon to several flowers to secure the flowers at different levels.

Fold the satin ribbon of the required length lengthwise and in half. Iron the fold line for convenience. Insert lace into the middle of the folded ribbon. Baste them by hand.

Use a sewing machine to sew the lace to the satin. Step back a couple of millimeters from the edge line to create a drawstring where you can insert an elastic band.

Throwing the bride's garter to unmarried guests at the end of the wedding banquet has become a kind of tradition, and the accessory itself now acts as an integral attribute of the image of the hero of the occasion. And if in most cases the dress is bought ready-made without individual tailoring, then many girls do the bride’s garter with their own hands.

To do this, it is not necessary to contact private craftsmen. We will help you make a garter so that it is unique.

The role of wedding traditions

The first primitive orders and rules of marriage began to emerge in the ancient world during the time of the Egyptian pharaohs. Nowadays, every country can boast of centuries-old wedding traditions, and their number is constantly growing. Many old customs have been forgotten because they have lost their relevance, but new ones are replacing them.

This happens because couples in love strive to make their first holiday together perfect, their ideas are gradually adopted by others, and so a new tradition arises. All customs are designed not only to make the wedding more interesting, but also to introduce future newlyweds to the general idea of marriage.

At different times, there were their own concepts of an ideal celebration, and now new canons are being created, which will then become outdated. The world is changing, and the tastes of young people are also becoming different, but at the same time, new traditions invariably appear that are accepted by the majority and exist for a long time.

What's happened

The first garters appeared several centuries ago, and at first they played only a practical role - they supported stockings and the lower part of pantaloons. In this regard, the design of this thing left much to be desired, which cannot be said about modern models, decorated to suit every taste.

Nowadays, in most cases, garters are used only for weddings, and specifically for one stage of the banquet. The groom takes this little thing off his beloved’s leg and throws it to the side where the bachelors are lined up.

It is believed that whoever catches the bride's garter will be the next unmarried wedding guest to find love. The tradition originated in the 90s of the last century in America.

It is important to take into account that everything in the bride’s image should be harmonious. Even the garter, which will be hidden under the dress almost the entire time of the holiday and will only appear to others for a few minutes, is selected in accordance with the outfit and other accessories.

Interesting! People are used to removing the garter with their hands, but it will be much more interesting if the groom does it with his teeth.

It is necessary not only to comply with the color scheme, but also to choose stylized decorations if the wedding is planned in a specific theme.

How to do

To make things easier for yourself, You can immediately purchase a ready-made garter along with the dress in a wedding salon or order a suitable item from a private needlewoman. Recently, many articles have been published in fashion magazines about how to make a garter for the bride with your own hands.

Those who are not looking for easy ways can make an accessory with their own hands according to their own sketch, putting their soul and imagination into the process.

The bride’s garter is not only sewn by hand, but it can also be knitted, and if desired, do without a needle and thread at all.

In most cases, the base for this part is sewn on a machine, and the decorations are attached by hand or glued.

How to sew in a classic style

In most cases, girls choose a white wedding dress, and only some accessories in this case are made in the form of a color accent; the garter can also be made white. How to make a garter for the bride? To do this you will need the following materials:

To make a standard garter, you need to cut 2 elements of 70 cm long from the lace braid, overlap them by about 3 mm and sweep them together with a needle and thread. The seam is then sewn by machine or stitched by hand, after which the basting thread is pulled out.

A satin ribbon of the same length, 1 cm wide, is sewn over the seam onto the lace base. You need to make two seams along its edges, 1 mm apart from them to leave free space for the elastic.

The sides are not stitched, but simply scorched with a lighter. Then an elastic band 35 cm long is cut, which must be secured to a pin and threaded between the lace and the ribbon, after which the sides are stitched using a machine. The last step is to sew the edges of the garter together, and the seam is processed with an overlocker or singed with a lighter.

To decorate, a wide satin ribbon is folded into a bow, its edges are trimmed and singed. It is attached with a glue gun, preferably on the opposite side of the final seam. If desired, you can add a rhinestone to the middle.

Useful videos: master classes

A video of how to make a bride's garter with your own hands is below.

Attribute with satin flowers

Weddings are often decorated in one of the shades of pink, as it symbolizes romantic feelings, tenderness and youth. To make a harmonious fuchsia garter, you will need the following materials:

satin ribbon 0.6, 2.5 and 4 cm wide;
lace ribbon 4 cm wide;
elastic band 2.5 cm wide;
ruler, scissors, candle.

From a wide satin ribbon and lace you need to cut one element 70 cm long and fasten them on a sewing machine along the upper and lower edges. Then an elastic band is threaded between them, its edges are overlapped and firmly stitched. After this, the edges of the base are also fastened.

A satin bow is made to decorate the garter. From a tape 2.5 cm wide, two parts are cut out 20 cm long and one 15 cm long, which is trimmed with a zigzag on the narrow sides.

The edges of each workpiece are scorched with a candle. Then the 20 cm long ribbon is folded in half so that one edge overlaps slightly and is sewn with basting stitches along the width.

Without cutting the thread, you need to do the same with the second such workpiece. Then they do the same with the third part, only it is not folded in half, but simply stitched along the middle line. The thread is pulled together and the finished bow is stitched from the wrong side. In addition to it, you need to tie a regular bow from a ribbon 0.6 cm wide and 25 cm long; it is glued in the middle of the main part on the front side. Then the entire structure is attached to the garter over the final seam, and a rose folded from a satin ribbon is glued into the middle.

A detailed master class in the video below will help you understand how to make a bride’s garter with your own hands.

Accessory in Tiffany style

A Tiffany style wedding is usually decorated in blue or turquoise with lots of sparkly details and rhinestones. And how to sew a garter for the bride with your own hands, in harmony with the overall surroundings and image of the bride, just use the following materials:

To make a garter according to your individual measurements, you need to measure the circumference of your leg in the place where the accessory will be placed.

The resulting value is the required length of the elastic. It is placed on a lace ribbon and sewn on a machine. To get ruffles, you need to slightly stretch the elastic. It is recommended to place the garter 15 cm above the knee to make it easier to remove.

The satin ribbon is stitched with basting stitches so that 6 squares are formed, that is, first the seam goes up, then to the side, then down, etc. Without securing the thread with a knot, the excess tape is cut off and it is pulled together, resulting in a small flower. Then a ribbon is cut from tulle slightly wider than the lace and stitched along one edge with basting stitches, after which it is pulled together.

The decoration is assembled in this order: a tulle “skirt”, a satin flower and a shiny ball. The entire structure is glued to the garter in the place where the final seam is made. To complement the decor, rhinestones are glued to the elastic band in several places.

You can clearly see in the video how to sew a bride’s garter with your own hands.

There is nothing complicated in making a garter, and guests will surely like a home-made accessory more than a purchased one.

You just need to select the materials in such a way that the image of the bride forms a single whole. In this case, both the newlyweds themselves and their loved ones will enjoy the tradition of garter tossing.

It is known that ladies take the issue of choosing each set of underwear seriously. The perfect bra and panties will highlight the advantages of a sexy figure. They can have an original design, embroidery or rhinestones applied on them.

I am glad that fashion designers are constantly offering new opportunities to update the image. They create special accessories that make the look perfect. Ladies are happy to choose:

stockings;
lace garter belt;
belt-skirt;
garters;
gloves.

On what occasion can you wear a garter?

A garter is an elegant product that is worn on the leg slightly above the knee. It is a piece of lace fabric, which is decorated with a satin ribbon. Beads or satin flowers can also be sewn onto it. An exquisite diamond brooch or bow will look great on a garter. To ensure that the accessory stays tightly on the body, a special silicone elastic band is sewn into it.

Ladies who understand the nuances of creating a sexy image know perfectly well why a garter is needed. This decoration is worn by brides at their wedding. While the future wife throws the wedding bouquet to the girls, the groom must throw the garter to the guys. It is believed that the young man who catches it will definitely meet his soul mate. A soft blue, pink, or virgin white garter will go well with a wedding dress.

Also, the product will look harmonious in tandem with an elegant evening dress. After all, there are accessories: blue, decorated with diamonds or bright red, which symbolize passion and undying emotions. A black garter is ideal for a classic outfit. In any case, every girl can choose a sophisticated and sexy option.

website: we offer beautiful ladies garters for any occasion

The Intimo online store tries to take into account all the wishes of its clients, so we have created a complete catalog of lingerie models. Here you can find models made from high-quality materials that retain their original appearance for a long time.

The catalog contains not only classic sets, but also quite extravagant ones. We offer modern seductive accessories.

Women know what garters are for. Our goal: to provide the greatest possible choice. For example, in the Intimo store you can purchase a product to match an evening or wedding dress. Manufacturers of accessories: Rosme, Lormar, Jolidon. Store managers are ready to answer related questions. We will be glad if every beautiful client can choose from us the perfect set of lingerie paired with an incredible accessory.

See garters in Intimo: Liana Raimanova

While watching romantic comedies, many have probably noticed that at a Western wedding, the groom throws a garter at the wedding, which he removes from the leg of his beloved girl. Where did this tradition come from and what does it mean? Our tradition of throwing the bride's accessory arose quite recently, but Russian couples are increasingly trying to follow it.

History of the wedding garter

An elegant garter for a wedding has ancient history. The word “garter” came into Russian from France, where the accessory had an exclusively practical function. It served to support pantaloons, and not only women, but also men used this comfortable item of clothing.

Photo of a wedding garter on the leg

But wedding traditions associated with the garter arose in England, and historians have differing opinions on this matter:

According to the first legend, the custom of throwing a garter at a wedding was introduced by the English monarch, who later even created Order of the Garter. At one of the balls, his lady love dropped an intimate item of clothing, and the king picked it up, wanting to please the girl. Initially, the king was going to return the accessory, but he saw the grins of those around him. He decided to publicly declare that the garter of the woman he loved was bound to bring him good luck, and he tied it on his own leg.
Another tradition has less romantic context. In some counties of Great Britain there was a custom according to which guests themselves tried to tear the garter from the bride’s leg right at the altar. Many were not happy with this state of affairs, and the girls began to throw the accessory into the crowd.

In the modern world, an interesting tradition originated in the 90s of the last century in the USA. Focusing on the West, Russian newlyweds also began to use a garter.

Why do you need a leg garter for a bride?

Groom throwing the bride's garter

There are several reasons that force brides to wear a garter under their dress to their wedding. Need a garter for the following purposes:

The first and most common is following Western tradition. The garter tossing by the bride or groom is a highlight of the wedding ceremony.
The accessory can also be used to create a complete image beautiful bride. Knowing that the outfit is thought out to the smallest detail, the girl will feel feminine and confident.
A bridal headband is a very sexy item of clothing. Many girls wear an elegant ribbon to make a pleasant surprise to your loved one on your wedding night.
Often the accessory turns into family value, passed on by inheritance. While a wedding dress is quite difficult to preserve and may go out of fashion, a garter always looks stylish and sexy. After many years, a regular headband will be called an heirloom.

Bride's wedding garter

When thinking about creating a wedding look, include a feminine garter in your outfit. You can keep its presence a secret and surprise your significant other, but if you are brave enough, implement the ancient tradition according to which the groom removes the garter holding his stockings and throws it to his friends.

On which leg does the bride wear a wedding garter?

In order for the garter to fulfill the function that old traditions attribute to it, it is necessary place the accessory correctly on the leg. There are no strict rules on this matter, but it is believed that the garter should be placed on the young person’s right leg just above the knee.

Many people wonder how many garters a bride should have at a wedding. In some regions of North America, it is customary to wear the tape on both legs at once, and each option has a certain meaning:

The garter, located on the right leg, is usually intended for single guests of the holiday.
The second piece of jewelry, located on the left, is considered a more intimate item and is removed at the end of the evening. Taking off her garter, the girl says goodbye to innocence and a free life. This type of garter is also called a “honey garter” because it marks the beginning of the honeymoon.

How many garters should there be at a wedding?

If the bride wants to use only one garter to perform the custom, she should choose the right side. This way the accessory will be charged with the necessary love energy and will bring good luck to its future owner who will soon start a family.

Many young couples strive to create a wedding with their own hands, making accessories, decorations and decorations themselves. The garter was no exception, the production of which was devoted to many master classes.

Watch the video on how to make a garter for the bride with your own hands:

Garters are made not only from openwork lace and shining lace, but are even crocheted.

We offer several simple options creating a wedding accessory that you can make yourself.

To sew a lace garter, need to stock up on the following:

wide strip of lace 1 meter long;
thin satin ribbon for decoration (you can choose any color);
sewing machine, thread, needle;
glue gun;
several goose feathers;
scissors.

The lace must be elastic so that the resulting decoration fits tightly on the leg. Having measured the required strip of fabric, the excess lace is cut off and the edges of the piece are sewn together.

Photo of a handmade garter for a bride for a wedding

It is better to attach all decorations for the future accessory using a glue gun. Rhinestones and beads are usually used, but goose feathers look delicate and airy. A narrow satin ribbon will be needed to make an elegant bow out of it, which is also glued to the workpiece. You can choose absolutely any color, but it is recommended to use a soft blue or blue tint.

A satin garter also looks very stylish. The technology for making a silk accessory is not too different from creating a lace ribbon.

To give elasticity, a strip of satin fabric is decorated with a wide openwork ribbon along its entire length. Decorate satin garters with small flowers made from the same material

Many girls find it difficult to imagine on their leg sexy crochet garter. However, by choosing high-quality threads and an interesting pattern, you can create a real work of art.

What does it mean to catch a garter at a wedding?

If the bride's bouquet is always caught by unmarried girls who want to quickly meet their soulmate, then the garter is the prerogative of the guys. What happens if a young man catches this accessory and what to do with the garter:

According to the most common belief, the owner of a woman's garter will soon invite friends for your own wedding.
The French believe that a man catches a garter at a wedding in order to become a happy man for whom Fortune always smiles.

An interesting custom is played out in the USA: there a young man who has caught the bride’s gift must dance with the girl who received the wedding bouquet

Removing the garter can happen in different ways. In the simplest version, the groom simply removes the garter with both hands while his betrothed is sitting on a chair, and then throws the accessory to his friends. However, some couples make the throwing process more fun, and the groom removes the tape with his teeth, diving under the skirt of his beloved girl with his head. This method is quite problematic - the elastic band of the product can cause pain to the bride, so it is better to do it with the hands of the newly-made spouse.

Signs associated with the bride's garter

How to choose a wedding garter?

If the bride is not a fan of needlework, you can purchase a headband in a store or make a custom-made accessory.

Despite the fact that it is impossible to see the satin ribbon under the dress, a complete wedding look implies a harmonious combination of all the smallest details of the outfit

To achieve this, it is important to consider some nuances of choice wedding garter:

Size. When choosing the required size of an accessory, you need to find the “golden mean”. A product that is too large can fall off your foot at the most inopportune moment, while a narrow elastic band will pinch the skin and cause discomfort.
Design. The design of the accessory is also of great importance. Sparkling rhinestones and large beads will be appropriate on the legs of a young girl, but older ladies should stick to the classic style.
Color. The garter can be any shade. White and beige ribbons are considered a win-win classic, which can be diluted with contrasting lace or a bow. However, many girls boldly decide to experiment and wear bright garters in contrasting colors: scarlet, pink, blue.
Textile. You should immediately forget about synthetics and cheap materials - on such an important day you should not skimp on fabric. When choosing an accessory, take into account the sensitivity of your skin; for example, organza can cause irritation.

Bride's Garter: Choosing an Accessory

Even if the bride does not want to throw an intimate item of clothing into the crowd, a garter can be worn to please her young husband. The right choice of garter will create a sexy image of a young bride.

Below is an interesting video of the bride's bandage being removed:

June 5, 2018, 00:03